WTT turbo & 95 hatch for 92-95 coupe or 94-97 integra
as it states i would like to trade mt 95 hatch dx with a t3/t4 turbo and hks bov for a coupe or integra the hatch has 98000 miles on it header,exhaust,coilovers tokiko blues,drill slots,cai,projecter headlights,gsr seats,short throw shifter just let me know what you got










T3/T4 REBUILT TURBO.
3" INLET DIAMETER
2" OUTLET
WET FLOATING BEARINGS
1/8 NPT OIL INLET
T3 / T4 FOOTPRINT OK !!
SPECS:
.57T COMPRESSOR WHEEL
.50 A/R COMPRESSOR
.63 A/R TURBINE
THIS TURBO WILL SUPPORT A EASILY 25+ psi
Standard T3/T4 Flange.
This turbo has been rebuilt and has about 2hrs or run time on it since rebuilt.. it was rebuilt with a water and oil cooled center section for added cooling..




This is website the turbo came from
http://www.xs-power.com/honda/index.html
And here is the BOV
http://www.fastwrx.com/turrflbovkit.html
3" INLET DIAMETER
2" OUTLET
WET FLOATING BEARINGS
1/8 NPT OIL INLET
T3 / T4 FOOTPRINT OK !!
SPECS:
.57T COMPRESSOR WHEEL
.50 A/R COMPRESSOR
.63 A/R TURBINE
THIS TURBO WILL SUPPORT A EASILY 25+ psi
Standard T3/T4 Flange.
This turbo has been rebuilt and has about 2hrs or run time on it since rebuilt.. it was rebuilt with a water and oil cooled center section for added cooling..
This is website the turbo came from
http://www.xs-power.com/honda/index.html
And here is the BOV
http://www.fastwrx.com/turrflbovkit.html
Trending Topics
send them to teammoified2006@yahoo.com






