I just got this ITR rear seat on my EG, but there gap between the seat (picture shown below). I'm wondering what you guys put in between it or what you guys do so that big gap wont show. PIcs of how you guys done it would help a lot. THANKS

 

people use the integra coupe back seat's back and the integra sedan cushion. sorry if i didn't answer your question, but they use this setup for no gaps.

 

not to thread jack but will itr rear seats fit in a 92-95 civic coupe?

 

can you show me exactly what it is? Cuz am not very familiar with integra interior. PICS WOULD HELP A LOT

 

no
sedan seats fit in a coupe

 

if the search button worked i would try to find it for you, but i'm pretty sure what i said is right. if someone can help me out or maybe correct me. sorry i don't have pictures to confirm.

 

that sucks....you could put some carpet or something where the line is so it doesnt show as much.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shoryuuu &raquo;</TD></TR><TR><TD CLASS="quote">I just got this ITR rear seat on my EG, but there gap between the seat (picture shown below). I'm wondering what you guys put in between it or what you guys do so that big gap wont show. PIcs of how you guys done it would help a lot. THANKS

</TD></TR></TABLE>

you can always throw a rug underneath. hey by the way, where did you get those?
i'm looking for a pair.

 

i guess, i have to do that if there no other way

 

i got these from this one guy near where i live. Got it for pretty cheap, ebay got some if you want it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shoryuuu &raquo;</TD></TR><TR><TD CLASS="quote">i guess, i have to do that if there no other way</TD></TR></TABLE>

not to be a thread jack, but where did you get them and for how much?

*EDIT* - local yard? do you have the number, i'm willing to pay for shipping.

 

sorry dude, you cant really find this from local yard, this you only can get it from either type r integra, which is really hard to find or get it from Japan. There a dude near i live got the whole ITR interior from Japan, but he wrecked his Integra, so he sold it to me for cheap $200 with other JDM parts. He still have the two front seats for 1200, hella expensive.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shoryuuu &raquo;</TD></TR><TR><TD CLASS="quote">sorry dude, you cant really find this from local yard, this you only can get it from either type r integra, which is really hard to find or get it from Japan. There a dude near i live got the whole ITR interior from Japan, but he wrecked his Integra, so he sold it to me for cheap $200 with other JDM parts. He still have the two front seats for 1200, hella expensive. </TD></TR></TABLE>

umm...yeah i know where they come from and how hard they are to find, just figured it wouldn't hurt to try. there's a yard around my way who so happen to have 2 itr's that were wrecked (bad too). but when i found the time to actually stop by, they were already stripped.

 

its really not hard to find, just have ,to be patient. Try ebay they have some, it cost you around 300something, but it worth it. Other than that you just have to wait for someone selling theirs, hondmarketplace had some on sale.

 

look in the classifieds, there are tons of them for sale.

 

Got my front and rear ITR seats for 450 bucs I think it was.. My rear seat doesnt do that, but that's just cuz I'm good I guess.

 

got pics, you sure your is not fake?

 

If you want no gap, then you must get 4 door ITR rear seats.

edit- to delete gap in the sides, that is.

 

you need to bolt it in, that will fix the gap at the rear of the bottom seat. when i did this (back in 2000) i installed a Nutsert, and bolted the cushion in.

 

I pm'd JDMhondaslut2 for info about his but he hasn't responded yet. I don't know if the ones with center tray fit different...but I'm guessing they do.

 

looks to me like the bottom part isnt bolted down yet, so it may not be sitting in the right location yet.

but i figure, just attach some carpet to the bottom of the seat backs. then pull the carpuet under the cushion.

it wont be perfect, but it will probably hide it nicely.


or you can just give the seats to me for free and i dont care about the gap

 

i think thats normal on the eg

i know the 4dr jdm itr seats fit without gaps.

 

the front bottom are bolt down, but that one metal stick is not on the right spot to bolt down. There another way to that show no gap, but it wont be bolt down and tight

 

I have GSR coupe leather in my 93 hb. The bottom will not fit right but you can make it look better. My car is black so I didnt have to but you may want to rattle can under the seats black. that will help to visually minnimise the gaps on the side of the seat.

the thing I did to get rid of the gap between the seat bottom and seat back was to roll up a black beach towel and lay it under the seat bottom to bring it up flush with the seat back.

I know it kinda sounds ghetto but it works and looks good. you can use a sedan seat bottom with a coupe seat back and they fit in a h/b.......but good luck on finding an R 4 door seat bottom lol

 

also my seat bottom isnt bolted down and it stays in place. once you but some thing under the back of the bottom to raise it up the little metal hook just kind of hooks under the seat back. seems to stay in place just fine