I definately love this more than my GF:p

Maxim Works Header+downpipe for Ep3 (CTR)

Hopefully it can work with em2 chassis.








"Found this on the EP3 Boards, thought i'd share... before I get to the pics its supposedly $1,531.26 USD, so BIG money on this header. Now on with the pics
Seems its the company that makes headers for Feel's, so it's a similar design, but the one above is made for the Ep3 chassis(but the CTR setup is basically DC5). Just posting it up if anybody has any interest in it. "

I saw this on the local Civic forum's and i was amazed. Thought id share it with ya'll.

 

i was still sleeping when i read this. i totally saw a question in there. my bad.

my opinion. there beefy.


Modified by iwantspeed at 7:46 AM 9/28/2006

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iwantspeed &raquo;</TD></TR><TR><TD CLASS="quote">the header in the picture will NOT work on our cars. if the actual header was facing the other way before they weld it down. then it MIGHT have a chance. but the header in that picture would be comming straight out the front of our car.. </TD></TR></TABLE>

Ok, wake up idiot its for a k-series motor not b or d motors... slap your self

 

the guy is asking if he does a k-swap on the em2, will that header fit with the em2 chassis. Obviously he knows that the header is for a k-series motor

 

it still wont fit. nuthing about that will fit into our cars.

 

im happy with either toda or bc.. still deciding what to get.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iwantspeed &raquo;</TD></TR><TR><TD CLASS="quote">it still wont fit. nuthing about that will fit into our cars. </TD></TR></TABLE>

If you had a K-series engine, it would fit easily. But, I wouldn't buy it. TODA has been producing differently tuned headers for the K-series for quite some time now. I'd go with a TODA header.

 

for thread title, can't say i love anything other then my family and wife.

as far as the header, no it won't fit your d series.

 

im pretty sure everyone that knows me knew that I knew that it was for a k20.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18a_CRX &raquo;</TD></TR><TR><TD CLASS="quote">im pretty sure everyone that knows me knew that I knew that it was for a k20.</TD></TR></TABLE>

I did.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18a_CRX &raquo;</TD></TR><TR><TD CLASS="quote">im pretty sure everyone that knows me knew that I knew that it was for a k20.</TD></TR></TABLE>


o rly?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Curiouz_G &raquo;</TD></TR><TR><TD CLASS="quote">


o rly? </TD></TR></TABLE>



a header like that would be a total waste on a d17

 

yes because it'd stick out 5ft in front of the car like the trumpet of an elephant

 

LOLOL Fvent u made me actually laugh out loud.

 

elephants have trumpets?

 

^^