hey im buildin a lsvtec turbo and expecting 3-350whp....whats a good..but yet cheap clutch(90-91 teg)...xtd stage 4..6puck...anybody have any input on these???good or not?

 

im using a exedy stage 2 3 puck, making 306, holding VERY well, a bit grabbing, but once it goes it goes

 

rite on...anybody eles?

 

stage 4 competition or clutchmaster

 

so a xtd stage 4 will hold up fine for 350whp?

 

Clutch packs are measured in torque, not horsepower.

 

ACT XTSS, holds 319ft.lbs and other ht users are running it with 550whp and it's still holding. And the best part is it's a street disc, so no harsh engagement, that's what I'm running. Gotta love the street disc comfort......

 

My competition feels softer on the pedal than my stock clutch did I kid you not but the clutch is either on or off there is very little play in between.

 

The one Im selling

Held ~400whp of my b16 just great

https://honda-tech.com/zerothread/1717116

 

Action 2ms 6 puck 500hp rated i have it and i know people that have had it and loved it couldnt go wrong wiht Action clutchs not badly priced either

 

ACT xtreme 6puck here, a bit harsh but i like it. Chicks cant press clutchpedal to the bottom

 

Competition Clutch Stage 4 or Stage 5 clutch, work great. If interested hit me up

 

i also use the exedy stage 2 3 puck ... good for 400ftlbs im making 256ftlbs on a dyno dynamic dyno so its 15% less than a dj it holds fine never slipps hold good enough to rip my axles to shreds lol ohh and the pedel of the exedy is soft a lil bit harder than stock ,, i love that spec in stop and go

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">Competition Clutch Stage 4 or Stage 5 clutch</TD></TR></TABLE>

 

im using an act hdr6 setup, making about 320whp. i it might engage a lil harsh on occasion, but with the hd pressure plate it feels pretty close to stock on the pedal

 

Ive also had good luck with ACT but never had the power you are looking to make. Ive used one in 250-275 whp setups.

Looking currently to purchase one for my 600 whp setup.