Apexi kit parts/d series turbo items/fuel and misc
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 4,306
Likes: 0
From: Why so you can pretend like youre interested, FL/OK
May be stepping out on my car so all this will be going up. If you're interested in it as a whole, post or PM the price you're interested at.
D series ball bearing kit:
Apexi turbo
manifold
downpipe and
intake pipe
440 RC injectors
Greddy boost and EGT gauges w/probe and all wiring - 52mm/black
Greddy Profec B ver.1
Greddy RS bov and 2.5in charge and I/C piping
oil sandwich adapter
JRC intercooler (purchased to replace a larger one so off hand don't recall dimensions) - inlet/out are 2.5 w/endtanks at the bottom and mounting location at the top
ACT clutch disk new in wrapping (used with ACT's heavy duty pressure plate they rate it at 223 ft-lbs of TQ and when used with the Xtreme pressure plate they rate it at 270 ft-lbs of TQ). I've got the XTSS pp as well however the outside face of it was eaten to shi. Doesn't affect hold.
Will probably be listing prices in a few days, offers are welcome, and BS is just that BS. My time is important so if you have a history of just talking, keep walking.
My PM is always available. I appreciate your time, thanks.
D series ball bearing kit:
Apexi turbo
manifold
downpipe and
intake pipe
440 RC injectors
Greddy boost and EGT gauges w/probe and all wiring - 52mm/black
Greddy Profec B ver.1
Greddy RS bov and 2.5in charge and I/C piping
oil sandwich adapter
JRC intercooler (purchased to replace a larger one so off hand don't recall dimensions) - inlet/out are 2.5 w/endtanks at the bottom and mounting location at the top
ACT clutch disk new in wrapping (used with ACT's heavy duty pressure plate they rate it at 223 ft-lbs of TQ and when used with the Xtreme pressure plate they rate it at 270 ft-lbs of TQ). I've got the XTSS pp as well however the outside face of it was eaten to shi. Doesn't affect hold.
Will probably be listing prices in a few days, offers are welcome, and BS is just that BS. My time is important so if you have a history of just talking, keep walking.
My PM is always available. I appreciate your time, thanks.
I want:
Apexi turbo
manifold (condition?)
downpipe and
intake pipe
440 RC injectors
Greddy boost gauge
Greddy RS bov and 2.5in charge and I/C piping
oil sandwich adapter
how much?
Apexi turbo
manifold (condition?)
downpipe and
intake pipe
440 RC injectors
Greddy boost gauge
Greddy RS bov and 2.5in charge and I/C piping
oil sandwich adapter
how much?
Thread
Thread Starter
Forum
Replies
Last Post
INVALID
Classifieds: Forced Induction
7
Sep 24, 2006 12:19 PM
TommyV
Classifieds: Forced Induction
21
Feb 16, 2004 12:19 PM



