Buddy Club pro spec eg6 Catback and Apexi n1 Dc2 Catback
Thread Starter
Joined: May 2002
Posts: 10,128
Likes: 0
From: bay area
Buddy Club pro spec eg6 Catback and Apexi n1 Dc2 Catback
I have a used Budy club Pro spec exhaust for an EG6 for sale. I bought it off my friend (Airbag club ) an di have never istalled it. i don't have an eg anymore so i have no use for this. i bought it for $400 and looking for around $350 (buyer pays for shipping)
Not actually picture of exhaust
Here Are Some Specs
Buddy Club Pro Spec is a super light weight and highly efficient muffler that is made to perform for circuit runs. In its street version, to optimize torque in the low to mid speed range, it is equipped with an efficient middle silencer (resonator). Pro Spec Mufflers were designed for high performance as well as meeting sound level standards. With its deep throaty tone, it echoes its racing lineage.
The middles silencer achieves both exhaust efficiency and sound dampening requirements. Usual mufflers are designed to "muffle" sound and results in restricting performance. Our mufflers, with results of trial and error, have developed the highest possible performance while maintaining a low throaty tone. We only used the finest material, that meets high endurance, light weight, and excellent fit.
The inner silencer is included with all mufflers. When installed it meets volume safety standards.
Improvement in durability can be seen by the use of "band- stay" hooks as attachment to the main silencer.The absence of welds help maintain the light weight frame. A mark of quality and craftsmanship, all muffler are engraved with the Buddy Club insignia.
2. I have a used apexi N1 Catback for sale from my integra type r. i bought it with it on my car. i would say the going rate for this is $300
Not an Actual pic of product
apexi N1 specs
* Piping Diameter: 60mm
* Tip Diameter: 115mm
* Minimal number of bends for maximum efficiency
* High-end power
The Apexi N1 series catback exhaust muffler system has become a staple of the import tuning industry. The Apexi N1 muffler was the first of its kind to incorporate the classic angled muffler design that has became so familiar with todays street cars. Born from Apexi's involvement in the grueling N1 endurance series race, the Apexi N1 exhaust system pairs a straight through design racing muffler with free flowing, mandrel bent piping (60.5mm N/A, 80mm for turbo applications). The combination has resulted in dyno proven horsepower and countless satisfied customers world wide. Designed with track use in mind, durability is of utmost importance. The polished SUS 304 stainless steel canister features robotic TIG welding for an immaculate finish and years of reliable performance. The mild steel piping is treated with Apexi's special high temperature titanium particle coating. The Apexi N1 is truly The benchmark in which others strive to duplicate.
If you are interested in anything, please PM me or email me at MSIU@F1spec or AIM: F!SPEC. Prices are negotiable, but please be reasonable.
pick up prefered
[IMG][/IMG]
Modified by F1Spec at 3:29 AM 9/14/2006
Modified by F1Spec at 3:33 AM 9/14/2006
Not actually picture of exhaust
Here Are Some Specs
Buddy Club Pro Spec is a super light weight and highly efficient muffler that is made to perform for circuit runs. In its street version, to optimize torque in the low to mid speed range, it is equipped with an efficient middle silencer (resonator). Pro Spec Mufflers were designed for high performance as well as meeting sound level standards. With its deep throaty tone, it echoes its racing lineage.
The middles silencer achieves both exhaust efficiency and sound dampening requirements. Usual mufflers are designed to "muffle" sound and results in restricting performance. Our mufflers, with results of trial and error, have developed the highest possible performance while maintaining a low throaty tone. We only used the finest material, that meets high endurance, light weight, and excellent fit.
The inner silencer is included with all mufflers. When installed it meets volume safety standards.
Improvement in durability can be seen by the use of "band- stay" hooks as attachment to the main silencer.The absence of welds help maintain the light weight frame. A mark of quality and craftsmanship, all muffler are engraved with the Buddy Club insignia.
2. I have a used apexi N1 Catback for sale from my integra type r. i bought it with it on my car. i would say the going rate for this is $300
Not an Actual pic of product
apexi N1 specs
* Piping Diameter: 60mm
* Tip Diameter: 115mm
* Minimal number of bends for maximum efficiency
* High-end power
The Apexi N1 series catback exhaust muffler system has become a staple of the import tuning industry. The Apexi N1 muffler was the first of its kind to incorporate the classic angled muffler design that has became so familiar with todays street cars. Born from Apexi's involvement in the grueling N1 endurance series race, the Apexi N1 exhaust system pairs a straight through design racing muffler with free flowing, mandrel bent piping (60.5mm N/A, 80mm for turbo applications). The combination has resulted in dyno proven horsepower and countless satisfied customers world wide. Designed with track use in mind, durability is of utmost importance. The polished SUS 304 stainless steel canister features robotic TIG welding for an immaculate finish and years of reliable performance. The mild steel piping is treated with Apexi's special high temperature titanium particle coating. The Apexi N1 is truly The benchmark in which others strive to duplicate.
If you are interested in anything, please PM me or email me at MSIU@F1spec or AIM: F!SPEC. Prices are negotiable, but please be reasonable.
pick up prefered
[IMG][/IMG]
Modified by F1Spec at 3:29 AM 9/14/2006
Modified by F1Spec at 3:33 AM 9/14/2006
Thread
Thread Starter
Forum
Replies
Last Post
honda_7
Acura RSX DC5 & Honda Civic EP3
9
Aug 4, 2004 04:50 PM
