Heres a link, they are relatively cheap, but from what ive heard, VERY good for the price.

As u can see, there are 3 styles, Carbon Fiber, Titanium, and Flat. All for around $100 Canadian.

if u have any info on these bars please post up, i might get one after reading how much REd.Em2. loved his neuspeed upper bar.

Hopefully i can engineer a way to slide my AEM SRI out of the way, so I can fit the smaller Titanium strut bar in.

Do u think it will make that much of a difference considering its a 3 piece, apposed to Neuspeed's 1 piece design?

Here are the pics and this is the link.

http://imageinmotion.com/products.php?cat=154


CARBON FIBER

Titanium

FLAT FRONT


Pics will be up shortly, im at my university and the comps gonig MAD slow.


Modified by B18a_CRX at 8:28 PM 9/8/2006

 

Of the three, I'd say the flatbar one looks most likely to be stable. But, I know you'll notice a difference when you put one on, so best of luck.

 

I went to the shop, and held one up. didnt look like it would be even close to working with the AEM Sri, so i guess i gotta save for the neuspeed.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18a_CRX &raquo;</TD></TR><TR><TD CLASS="quote">I went to the shop, and held one up. didnt look like it would be even close to working with the AEM Sri, so i guess i gotta save for the neuspeed.</TD></TR></TABLE>

yup, our intakes get in the way, so far only bar ive seen that would work was the neospeed.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18a_CRX &raquo;</TD></TR><TR><TD CLASS="quote"> so i guess i gotta save for the neuspeed.</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AiL45 &raquo;</TD></TR><TR><TD CLASS="quote">

yup, our intakes get in the way, so far only bar ive seen that would work was the neospeed.</TD></TR></TABLE>





Behold!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Red.EM2 &raquo;</TD></TR><TR><TD CLASS="quote">



Behold!!!</TD></TR></TABLE>

yup, behold the sexiness. lol yea i wanna get that strut bar, but yea.. with that 150 or w.e it costs i rather 1st get my foglights n rear lip

 

ya neuspeed bars are around 225-250 CDN. I only looked at these bars, cause they were on from $65-100 CDN.

 

http://www.truehonda.com/inven...d=103

Truehonda has a special price on Neuspeed bars, 160 shipped.

 

ya 160USD= 200ish CAD, so still not cheap.

Ill just wait for Xmas and get a Front/Rear Strut setup, and maybe finally some coilovers

 

actually i would check in at 7thgencivic.com in the marketplace area, there is a guy selling them for 90 + 15 shipping

 

the downside is that you won't be able to clear it with an intake on. the only strutbars that can clear any aftermarket intake is dc sports, neuspeed, and greddy (rsx model)

 

i have the NRG bronze strutbar i love it great buy...

 

have you guys ever thought about cutting the pipe...................to fit the straight bars just a suggestion..................soo it would clear over the intake

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tak1civic &raquo;</TD></TR><TR><TD CLASS="quote">have you guys ever thought about cutting the pipe...................to fit the straight bars just a suggestion..................soo it would clear over the intake</TD></TR></TABLE>

Works and Fits great with a K20

 

maybe ill try that. How many inches do u need to cut off to accomidate an intake?

 

JUST MEASURE TO SEE HOW MUCH YOU WOULD HAVE TO CUT............

 

if i already had the strut bar i could do that, but since i dont have one to use, and i dont wanna buy it and realize i have to cut way to much, ill just wait for Xmas and get the neuspeed.

 

TRUE.................

 

i have the carbon fiber one new in box. i never installed after being told it needed to be modified to compensate for my cai. i can sell it to you for 75 obo shipped if you want.

 

Considering they are selling for $50 canadian on imageinmotion.com i think ill pass on $75 US.