Ok im about to fully strip down a complete b20b and rebuild it as a b20b i have every gasket known to man for this and i have a few things i want to do to it
can you guys help and let me know if there is anything im missing or should be doing - list as below

1 - buy engine (done)
2 - strip engine completly down (in progress)
3 - send block to be cleaned and decked
4 - send pistons and crank and all other stuff that goes on this to get balanced
5 - getting the head done ( intakes ports smoothed and 3 angle grind on the valves)
6 - send cams away to get a regrind
7 - put back together
8 - put into car and turn key

ok now is there anything im missing

oh and i got other goodies to go on but thats once the motor is complete

any help would be cool

p.s dont mention vtec cause that aint happening



Modified by euro_r_wagon at 2:45 PM 8/30/2006

 

bump anyone in the states able to help - in new zealand no one does this motor up

cheers

 

surely someone must be able to help me - you cant all be stupid over there