FS: Fully built BENSON block, 83mm GSR, cp pistons, Eagle rods, ACL bearings, Benson Sleeves
Thread Starter
Honda-Tech Member
Joined: Jun 2003
Posts: 987
Likes: 1
From: Taylor, Pa, USA
Benson block is sold!
Benson block is sold; thanks to all that were interested
Modified by 99teggsr at 9:56 PM 8/24/2006
Modified by 99teggsr at 9:14 PM 9/3/2006
Modified by 99teggsr at 7:43 PM 10/21/2006
Modified by 99teggsr at 9:56 PM 8/24/2006
Modified by 99teggsr at 9:14 PM 9/3/2006
Modified by 99teggsr at 7:43 PM 10/21/2006
Trending Topics
...free bump. Too bad i already bought a block for building, would have picke this up to speed up my build lol.
Honda-Tech Member
Joined: Apr 2002
Posts: 1,201
Likes: 0
From: PA
Re: (J1A1H)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by J1A1H »</TD></TR><TR><TD CLASS="quote">im interested. Just wondering, can i also use this blcok for NA use by just changin the pistons to 12:1? </TD></TR></TABLE>
Why wouldn't you be able to? Yeah, you can change the pistons to your CR...I dunno if I'd use those eagle rods if you're going to rev high, though.
Why wouldn't you be able to? Yeah, you can change the pistons to your CR...I dunno if I'd use those eagle rods if you're going to rev high, though.
Honda-Tech Member
Joined: Mar 2003
Posts: 2,244
Likes: 0
From: dirty south
Re: (Justin Klemgold)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Justin Klemgold »</TD></TR><TR><TD CLASS="quote">
Why wouldn't you be able to? Yeah, you can change the pistons to your CR...I dunno if I'd use those eagle rods if you're going to rev high, though.</TD></TR></TABLE>
the eagle rods will be fine bump for a good deal
Why wouldn't you be able to? Yeah, you can change the pistons to your CR...I dunno if I'd use those eagle rods if you're going to rev high, though.</TD></TR></TABLE>
the eagle rods will be fine bump for a good deal
Honda-Tech Member
Joined: Apr 2002
Posts: 1,201
Likes: 0
From: PA
Re: (Cole D)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cole D »</TD></TR><TR><TD CLASS="quote">
the eagle rods will be fine bump for a good deal </TD></TR></TABLE>
Not a lot of good engine builders will recommend eagle rods...especially for N/A applications where one revs high. That's where they tend to fail.
the eagle rods will be fine bump for a good deal </TD></TR></TABLE>
Not a lot of good engine builders will recommend eagle rods...especially for N/A applications where one revs high. That's where they tend to fail.