MAKE AN OFFER ON ANYTHING<> I NEED TO PAY MY TUITION BY TOMORROW. ILL TAKE THE OFFER
Thread Starter
Who is Mr Robot?
iTrader: (2)
Joined: Jul 2004
Posts: 21,474
Likes: 10
From: ATL - Where the Pimps and Players dwell
MAKE AN OFFER ON ANYTHING<> I NEED TO PAY MY TUITION BY TOMORROW. ILL TAKE THE OFFER
<FONT SIZE="10">MAKE AN OFFER ON ANYTHING<> I NEED TO PAY MY TUITION BY TOMORROW. ILL TAKE THE OFFER</FONT>
Reason for selling is im getting out of the honda scene to focus on school. i also need to buy a car this week, so prices are negoitiable/
(PICS UP SHORTLY)
First up is my built block.
sleeved by precisionh23a, built by me
obd1 b18A1 block
Darton MID Sleeves, 84.5mm bore
84.5mm CP Pistons 9:1 C/R
Manley Rods
ACL Bearings
89mm crank that has been knife-edged, balanced, and micropolished. The oil gallies have also been honed and plugged, as well as the outlets being radiused, fluted and chamfered.
ITR Oil Pump
Golden Eagle LS/VTEC Kit
Golden Eagle Head Studs
Golden Eagle Waterpump Blockoff (must use external pump, will sell for extra 100)
Mugen Thermostat switch
LS Oilpan and Pickup
New tensioner, T-Belt, seals, etc. all new oem bolts from honda.
3000 OBO
view of block and head
Built GSR Head, picked this up from a buddy
Stage 5 porting by RPMNYC
Ferrea valve guides
1mm oversized supertech black nitride coated valves
Crower Springs and Titanium Retainers
comes with all cam caps and bolts, no cams or valve cover... will toss in b16 cams with gears for an extra 50
(more/better pics tomorrow)
1,000 OBO
OS Giken Twinplate Clutch
(will get better pics tomorrow)
Basically brand new.. used for 1 dyno pull.
800 OBO
20 Gallon Fuel Cell
paid 250ish shipped, ill let it go for 225shipped plus paypal fee.
Fluidampr, race version, no provision for ac or ps. alt only.
(will get better pics tomorrow)
Paid 350, ill let it go for 325 OBO
Custom Sheetmetal Intake Manifold made by RPMnyc
Fits a gsr head and 75mm Mustang TB
400 OBO
75mm Mustang TB
75 OBO
Gator Stage 3 Axles. bought used, never used them. come with new axle nuts
(will get better pics tomorrow)
400 OBO
ERL Fuel rail, Black. New
80 OBO
more ill probably think of later
Modified by wantboost at 7:29 PM 8/22/2006
Reason for selling is im getting out of the honda scene to focus on school. i also need to buy a car this week, so prices are negoitiable/
(PICS UP SHORTLY)
First up is my built block.
sleeved by precisionh23a, built by me
obd1 b18A1 block
Darton MID Sleeves, 84.5mm bore
84.5mm CP Pistons 9:1 C/R
Manley Rods
ACL Bearings
89mm crank that has been knife-edged, balanced, and micropolished. The oil gallies have also been honed and plugged, as well as the outlets being radiused, fluted and chamfered.
ITR Oil Pump
Golden Eagle LS/VTEC Kit
Golden Eagle Head Studs
Golden Eagle Waterpump Blockoff (must use external pump, will sell for extra 100)
Mugen Thermostat switch
LS Oilpan and Pickup
New tensioner, T-Belt, seals, etc. all new oem bolts from honda.
3000 OBO
view of block and head
Built GSR Head, picked this up from a buddy
Stage 5 porting by RPMNYC
Ferrea valve guides
1mm oversized supertech black nitride coated valves
Crower Springs and Titanium Retainers
comes with all cam caps and bolts, no cams or valve cover... will toss in b16 cams with gears for an extra 50
(more/better pics tomorrow)
1,000 OBO
OS Giken Twinplate Clutch
(will get better pics tomorrow)Basically brand new.. used for 1 dyno pull.
800 OBO
20 Gallon Fuel Cell
paid 250ish shipped, ill let it go for 225shipped plus paypal fee.
Fluidampr, race version, no provision for ac or ps. alt only.
(will get better pics tomorrow)
Paid 350, ill let it go for 325 OBO
Custom Sheetmetal Intake Manifold made by RPMnyc
Fits a gsr head and 75mm Mustang TB
400 OBO
75mm Mustang TB
75 OBO
Gator Stage 3 Axles. bought used, never used them. come with new axle nuts
(will get better pics tomorrow)
400 OBO
ERL Fuel rail, Black. New
80 OBO
more ill probably think of later
Modified by wantboost at 7:29 PM 8/22/2006
Thread Starter
Who is Mr Robot?
iTrader: (2)
Joined: Jul 2004
Posts: 21,474
Likes: 10
From: ATL - Where the Pimps and Players dwell
Re: MAKE AN OFFER ON ANYTHING<> I NEED TO PAY MY TUITION BY TOMORROW. ILL TAKE THE OFFER (want
the motor has 0 miles on it since it was built.
i havent used the head or any of my parts either.
all new unless i bought them used (very little use at that)
i havent used the head or any of my parts either.
all new unless i bought them used (very little use at that)
Thread Starter
Who is Mr Robot?
iTrader: (2)
Joined: Jul 2004
Posts: 21,474
Likes: 10
From: ATL - Where the Pimps and Players dwell
Re: MAKE AN OFFER ON ANYTHING<> I NEED TO PAY MY TUITION BY TOMORROW. ILL TAKE THE OFFER (want
make an offer means shoot me a price..... like any price
Trending Topics
Honda-Tech Member
Joined: Sep 2002
Posts: 6,663
Likes: 0
From: Allentown, PA, USA
Re: MAKE AN OFFER ON ANYTHING<> I NEED TO PAY MY TUITION BY TOMORROW. ILL TAKE THE OFFER (want
why did you decide to use the water pump block off plate? I will come up with some prices and shoot you offers later.
Thread Starter
Who is Mr Robot?
iTrader: (2)
Joined: Jul 2004
Posts: 21,474
Likes: 10
From: ATL - Where the Pimps and Players dwell
Re: MAKE AN OFFER ON ANYTHING<> I NEED TO PAY MY TUITION BY TOMORROW. ILL TAKE THE OFFER (want
less parasitic drag. and i can reverse cool the block, that is cool the head first. since that seems to be where most issues are on high hp motors.
just lemme know
just lemme know
Re: MAKE AN OFFER ON ANYTHING<> I NEED TO PAY MY TUITION BY TOMORROW. ILL TAKE THE OFFER (want
how much for the block on the lowest you can go for me? make it the cheapest possible, like taking the t belt off and water pump and oil sandwhich..
