5th Gen Prelude All Motor Times...let's see em!
Thread Starter
Joined: Aug 2004
Posts: 632
Likes: 0
From: Annapolis, Maryland, U.S.A.
5th Gen Prelude All Motor Times...let's see em!
I'd like to see what other all motor 5th gens run in the quarter. I'd like to see where I stack up among my peers, and comments on how I could improve. Here's my timeslip.
The weather was great 59F and 39 Humidity with a 18.19 on the Absolute Baro.
There was no one in the other lane, so i was waiting for someone when the lights came down. When I saw the green i wasn't sure to wait or to go. Then they gave me the signal, I revveed it and took off. I think I launched from 7,000 RPM and feathered it out. I have never launched so hard in my life. I can't believe that crazy 60ft on all season Falken Ziex 512 Tires. Next step...slicks!
My Setup:
Power: AEM CAI/S2 IM/Hondata IM Gasket/Type One Racing Header(2.36'' collector), 2.25'' Test Pipe, 2.25'' Thermal Exhaust, Hondata S200 on a P28. Dynoed around 188WHP/140TQ
Suspension:TEIN SS Coilovers(set at 10/16),Stock Wheels,Falken Ziex 512 tires(set at 24psi/40psi).
Transmission: Stock Tranny, Clutch, and Flywheel.
Weight Reduction: I have stripped out the back of my car. The weight reduced from the items taken out is 117lbs, factor in another 15lbs for lighter I/H/E and that comes to 132lbs. So the curb weight from 2950 is now 2817.
UPDATE: I should have slicks on and mounted by early september. Shooting for a 13.9, gotta rep the 5th gen hard
The weather was great 59F and 39 Humidity with a 18.19 on the Absolute Baro.
There was no one in the other lane, so i was waiting for someone when the lights came down. When I saw the green i wasn't sure to wait or to go. Then they gave me the signal, I revveed it and took off. I think I launched from 7,000 RPM and feathered it out. I have never launched so hard in my life. I can't believe that crazy 60ft on all season Falken Ziex 512 Tires. Next step...slicks!
My Setup:
Power: AEM CAI/S2 IM/Hondata IM Gasket/Type One Racing Header(2.36'' collector), 2.25'' Test Pipe, 2.25'' Thermal Exhaust, Hondata S200 on a P28. Dynoed around 188WHP/140TQ
Suspension:TEIN SS Coilovers(set at 10/16),Stock Wheels,Falken Ziex 512 tires(set at 24psi/40psi).
Transmission: Stock Tranny, Clutch, and Flywheel.
Weight Reduction: I have stripped out the back of my car. The weight reduced from the items taken out is 117lbs, factor in another 15lbs for lighter I/H/E and that comes to 132lbs. So the curb weight from 2950 is now 2817.
UPDATE: I should have slicks on and mounted by early september. Shooting for a 13.9, gotta rep the 5th gen hard
Thread
Thread Starter
Forum
Replies
Last Post
vietdragontekx
Honda Prelude
2
Feb 9, 2006 04:11 AM
