Now that I have basicly solved the big problems with my swap, its time for the little things. I think when I was swapping over my h23 manual tentioner stuff over to my h22, I think I mixed up the dipsticks. One is slightly longer then the other. I need people who have have done an H22 swap into an Si, I need to know what dip stick is longer. The h22 or the h23?

 

It must be the H23 cause I did the swap from F22 to H22 and they were the same length. I am pretty sure.

 

up

 

all i know is the h23, f22 and h22 all ahve diff part numpers for the dipstick...wish i could help more than that

 

if only the part numbers were printed on each part lol

 

I will go measure the length of my H22 tomorrow and get back with you.

 

cool thanks

 

I'm not sure about the H23 dipstick, but I know for a fact that the F22 dipstick is longer than the H22 dipstick.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nakajima &raquo;</TD></TR><TR><TD CLASS="quote">I'm not sure about the H23 dipstick, but I know for a fact that the F22 dipstick is longer than the H22 dipstick.</TD></TR></TABLE>

doesn't help me, I have an h22 and an h23 dipstick