alright after 2 tries at ordering stock oem bumpers for my 2000 integra, usdm steez. i have had no luck. id like to get jdm front end but too much $... whats a clean ground effects kit... i dont want a body kit, but its cheapest option.

 

cheapest option is a set of lips or the OEM optional kit.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bluemax189 &raquo;</TD></TR><TR><TD CLASS="quote">cheapest option is a set of lips or the OEM optional kit. </TD></TR></TABLE>

oem optionals aint that cheap

 

you can always try and get a replica kit of the oem optional kit. I believe there is someone in the Type R forum fs/wtb thread selling the rear replica valence's.

Ali

 

Get an ebay replica of the sides+ replica front lip and rear valences if you can't afford the real deal.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shutupnskate &raquo;</TD></TR><TR><TD CLASS="quote">Get an ebay replica of the sides+ replica front lip and rear valences if you can't afford the real deal.</TD></TR></TABLE>

what kind of quality are those front replica lips?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by God.Loves.Ugly &raquo;</TD></TR><TR><TD CLASS="quote">

what kind of quality are those front replica lips? </TD></TR></TABLE>

The ones I see usually seem to be average looking. Small flaws...nothing serious usually.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by God.Loves.Ugly &raquo;</TD></TR><TR><TD CLASS="quote">

what kind of quality are those front replica lips? </TD></TR></TABLE>

I personally rock a 97 OEM ITR lip, but also curious to know if these kits are any good.

 

Go cruise the junk yard... there is a good chance you will find what you want there.

 

Get a wings west lip kit. they make lip kits out of eurathane that are very durable and fit jsut like OEM

if not get a buddly club 2 kit. very subtle yet different for a body kit... very nice look it up.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rajin &raquo;</TD></TR><TR><TD CLASS="quote">The ones I see usually seem to be average looking. Small flaws...nothing serious usually.</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shutupnskate &raquo;</TD></TR><TR><TD CLASS="quote">I personally rock a 97 OEM ITR lip, but also curious to know if these kits are any good.</TD></TR></TABLE>

hmmm I have been thinking about buying one. if I do I'll let you know.

 

wings west ftmfw

my 96 gsr with the wings west ill have my rear lip for sale soon. and prolly get the oem rear valence i dont think that they go all the way across and with this one my new exhuast wont work it will rub.

 

nice ride bro, clean with minor rice. yeah but if all i needed was a lip kit, id be all over it. but i need BUMPERS! i just dont want some flaming ricey ****. and oem replacement is to many bills...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yeahright &raquo;</TD></TR><TR><TD CLASS="quote">nice ride bro, clean with minor rice. yeah but if all i needed was a lip kit, id be all over it. but i need BUMPERS! i just dont want some flaming ricey ****. and oem replacement is to many bills...</TD></TR></TABLE>

A fiberglass bodykit will inevitably crack and break, costing you more $ in the end. Hold out for OEM. If worst comes to worst, throw a 94-97 bumper on temporarily.

 

what am i cryin about. 2 oem bumpers r prob as much as a ****** **** body kit.... unfortunately it took this thread to realize this... haha


Modified by yeahright at 2:15 AM 8/13/2006

 

those skirts make me throw up

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg4usdm &raquo;</TD></TR><TR><TD CLASS="quote">those skirts make me throw up</TD></TR></TABLE>

that and the gs-r badge.

 

Kit GSR badge

 

if you dont wanna get oem then get an aftermarket front bumper off ebay. the only difference is it wont say integra and it may be a little thinner then the original bumper.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bshshondaman06 &raquo;</TD></TR><TR><TD CLASS="quote">wings west ftmfw

my 96 gsr with the wings west ill have my rear lip for sale soon. and prolly get the oem rear valence i dont think that they go all the way across and with this one my new exhuast wont work it will rub.
</TD></TR></TABLE>
the oem rear valences will not fit the 94-97 rear bumper, you'll also need to buy a 98+ rear bumper.

 

i have an oem 98 bumper with oem fogs, oem lip, but the lip has a fat crack on it and one of the fog lenses is hella cracked... i picked it up for $100... just look around.. i found mine on craigslist.... so i'm just trying to find where i'm gonna get that crack repaired... and i also need to get it color matched because it's a white bumper... but yeah... used is not a bad way to go... cuz i know that i don't have the moola for brand new parts... so just look around on classified ads anywhere you can find. you just might be surprsed. go craigslist

 

heres pics of my OEM optional replica. i love it

 

ive got oem rear lips fs

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SFrymyah &raquo;</TD></TR><TR><TD CLASS="quote">heres pics of my OEM optional replica. i love it



</TD></TR></TABLE>

the weather strip on the front lip doesn't look right. other than that, looks good

 

i have those same skirts, i like them.. i think the lighting is making them look kinda funky.. heres mine. not very many good looking options in that department imo.