ok so i searched and found out how to adjust headlights and stuff.. with a screw driver.. but i saw Clockwise = UP or if using the other adjusting it is RIGHT and Counter-clockwise = DOwn or Left. but i was wondering if that meant The SCREW DRIVER turning clockwise or the actual silver thing spinning Clockwise.. cause i believe if i screw the screwdriver clockwise, the Silver thing goes Counter-clockwise..

 

plz help.. wanna find out tonight so i can go do it..

 

There talking about the screw inside the headlight. The one on TI tricked me for a sec too. But if you do the install right at dusk/dawn you can see the adjustments that you are making.