FS: complete JDM DOHC F20A with JDM H22 transmission swap for dc/eg!! Cheap!
This is for the complete swap out of the integra that i had for sale a couple weeks ago. The new owner didn't want to swap so the whole thing is for sale. This swap ran great in the integra before being pulled. The motor has many new parts, The whole distributor was redone (new ignitor, coil, cap, rotor, etc.) New alternator belt etc...
JDM DOHC F20A - (Extremely awesome Rod/Stroke ratio, especially for a f/h motor). This motor is basically a F series block (so iron sleeves, no FRM) and a H23 head (Which means a DSM turbo set-up or a nicer turbo set-up is easy to adapt). I already put the larger better flowing H23 intake manifold and throttle body on the motor.
JDM H22 M2A4 (non LSD) Transmission - Great transmission, it came with my complete swap from hmotorsonline. This has lower gearing then other f/h trannies, which means faster acceleration
Competition Clutch Lightweight Flywheel - less then 7,000 on it
Competition Clutch Stage 2 Clutch - less then 7,000 on it
Prelude Shifter assembly and shifter cables
HCP Motor mounts with driver side billet mount and A/C mount
Wiring harness already wired for the swap into a DC/EG and ECU
New axles
This is the complete swap, everything you need to make this swap run in your car. All of this for a very low price of only $800





JDM DOHC F20A - (Extremely awesome Rod/Stroke ratio, especially for a f/h motor). This motor is basically a F series block (so iron sleeves, no FRM) and a H23 head (Which means a DSM turbo set-up or a nicer turbo set-up is easy to adapt). I already put the larger better flowing H23 intake manifold and throttle body on the motor.
JDM H22 M2A4 (non LSD) Transmission - Great transmission, it came with my complete swap from hmotorsonline. This has lower gearing then other f/h trannies, which means faster acceleration

Competition Clutch Lightweight Flywheel - less then 7,000 on it
Competition Clutch Stage 2 Clutch - less then 7,000 on it
Prelude Shifter assembly and shifter cables
HCP Motor mounts with driver side billet mount and A/C mount
Wiring harness already wired for the swap into a DC/EG and ECU
New axles
This is the complete swap, everything you need to make this swap run in your car. All of this for a very low price of only $800





TTT, PM me with offers. If you have an accord or prelude and dont need all of the extra civic/integra swap parts i can cut you a deal also. Lets move this bad *** motor.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
allmotorb18c14door
Mid-Atlantic (Sales)
13
Nov 17, 2011 01:13 PM




