Complete K24a2 swap into EK (everything u need to run!!)
I have my full K24a2 swap into my EK hatch for sale. The car was hit in the rear pasenger corner and messed up the rear quarter panel pretty bad so I'm just gonna part it out. I really need to get rid of it as soon as possible! Here is all that is included:
2004 K24a2 (around 15,xxx miles)
EP3 tranny
Type S Intake Manifold
Type R TB
Hondata IMG
HASport mounts
Camp1320 Axles
Hybrid Racing Harness
Hybrid Racing Clutch line kit
Type s shifter box
Type s shift linkage
Karcepts shifter box kit
Steel Braided Fuel lines
Golden Eagle fuel rail
Aeromotive FPR
K-PRO
OBX Header
Type R valve cover
Custom intake converts from short-ram to cold air
Probably some other things that I am forgetting
Here are some pics:


The damage (notice the hatch is OK!!):

Whole car from the other side:

Swap comes with all sensors, hoses, basically everything straight out of my car and into yours. Car runs great and the motor is strong. I never got the chance to race at the track in the time I had it in my car, I also never tuned it, only ran the TSX base map in the K-PRO.
Here is the thread I had when I installed the motor so there are pics in there of the motor: http://www.k20a.org/forum/showthread.php?t=3071
I would really like to get $7500 o.b.o. for everything with the swap or $8000 if you want the chassis too. The car has some h&r springs, gsr rims, gsr cloth seats, type r shift boot, autometer monster tach, and slight body damage (hehe..
) I spent over $10,000 by the time i had it finished (was one of the early K24a2 swaps so many parts i purchased were trial and error).
Post or PM if interested. Of course pickup is prefered but I will ship at your expense. I will get some updated pics on here as well and some of the damage to the car so you can easily see it would have no effect on the motor. Thanks!
Modified by g0ldywang at 9:55 PM 8/2/2006
2004 K24a2 (around 15,xxx miles)
EP3 tranny
Type S Intake Manifold
Type R TB
Hondata IMG
HASport mounts
Camp1320 Axles
Hybrid Racing Harness
Hybrid Racing Clutch line kit
Type s shifter box
Type s shift linkage
Karcepts shifter box kit
Steel Braided Fuel lines
Golden Eagle fuel rail
Aeromotive FPR
K-PRO
OBX Header
Type R valve cover
Custom intake converts from short-ram to cold air
Probably some other things that I am forgetting
Here are some pics:


The damage (notice the hatch is OK!!):

Whole car from the other side:

Swap comes with all sensors, hoses, basically everything straight out of my car and into yours. Car runs great and the motor is strong. I never got the chance to race at the track in the time I had it in my car, I also never tuned it, only ran the TSX base map in the K-PRO.
Here is the thread I had when I installed the motor so there are pics in there of the motor: http://www.k20a.org/forum/showthread.php?t=3071
I would really like to get $7500 o.b.o. for everything with the swap or $8000 if you want the chassis too. The car has some h&r springs, gsr rims, gsr cloth seats, type r shift boot, autometer monster tach, and slight body damage (hehe..
) I spent over $10,000 by the time i had it finished (was one of the early K24a2 swaps so many parts i purchased were trial and error).Post or PM if interested. Of course pickup is prefered but I will ship at your expense. I will get some updated pics on here as well and some of the damage to the car so you can easily see it would have no effect on the motor. Thanks!
Modified by g0ldywang at 9:55 PM 8/2/2006
Trending Topics
i appreciate the offer but no thanks, i would be taking too big a loss then, plus i have a couple people now interested in buying the entire car which is the best scenario so i gotta see how that plays out.
Thread
Thread Starter
Forum
Replies
Last Post
JOE-C
Mid-Atlantic (Sales)
2
Oct 13, 2006 09:29 AM
Irishweird00
Hybrid / Engine Swaps
14
May 24, 2004 11:35 AM




