FS: Arias forged D16Z6 high-compression pistons with rods
Thread Starter
Honda-Tech Member
Joined: Nov 2004
Posts: 2,296
Likes: 0
From: cincinnati, oh, united states
FS: Arias forged D16Z6 high-compression pistons with rods **new price**
I have a set of Arias standard size (75mm) forged pistons for use in a D16Z6 or D16Y7 all-motor or nitrous application. They are already mounted on OEM Honda Z6 rods and niether the rods or the pistons show any signs of abnormal wear (no piston skirt damage, bent rods, etc.). They are an older model than Arias sells now, but I spoke with a tech from Arias and he said that they are still pretty similar to the current piston as far as specs. Here are the specs of the current piston:
<FONT COLOR="Blue">D16Z6, Y7 75.50mm 11.5:1 compression
Compression Height: 1.181
Dome CC: -0.4
Gram Wt: 243</FONT>
Notes:
Specs are for use with D16Z6 or D16Y7 head only with D16 block
Asking <FONT COLOR="Red">$200 OBO shipped</FONT> for the rods and pistons. There are rings on the pistons now, but I would suggest replacing them before trying to put them in a block.
here is a pic of one of the pistons. they all look the same.
*click on it to see it bigger*
Modified by DelSolDon at 8:45 AM 8/31/2006
<FONT COLOR="Blue">D16Z6, Y7 75.50mm 11.5:1 compression
Compression Height: 1.181
Dome CC: -0.4
Gram Wt: 243</FONT>
Notes:
Specs are for use with D16Z6 or D16Y7 head only with D16 block
Asking <FONT COLOR="Red">$200 OBO shipped</FONT> for the rods and pistons. There are rings on the pistons now, but I would suggest replacing them before trying to put them in a block.
here is a pic of one of the pistons. they all look the same.
*click on it to see it bigger*
Modified by DelSolDon at 8:45 AM 8/31/2006
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Nov 2004
Posts: 2,296
Likes: 0
From: cincinnati, oh, united states
Re: FS: Arias forged D16Z6 high-compression pistons with rods (DelSolDon)
bump for the edit. after actually measuring, them i found out that the pistons are for standard size bore.