JRSC, LCA, Kamikaze, Omnipower, and more.
Thread Starter
Honda-Tech Member
Joined: Jan 2005
Posts: 5,641
Likes: 0
From: Lower Right Hand Corner, PA
Before I start, I haven't sold a ton of stuff on here, but I do have a few vouches and plenty of people who will tell you that I'm a nice guy to work with.
Payment - Payment can be made via paypal to SovXietday@gmail.com. Money Order/Cashiers Check is also accepted, but paypal is preffered!
Contacts
Email: SovXietday@gmail.com
AIM: sovallstar88
PM: SovXietday
If you want to purchase, or have any questions at all, please send me a PM on here or contact me via AIM or Email! It makes it easier for me and will help you get what you want faster.
NO LOWBALLERS.
All items are plus shipping unless noted otherwise.
Dseries Jackson Racing Supercharger
-M45 Blower, 6psi pulley and a full bolt on kit. Alternator bracket, two brand new idler pullies, supercharger belt, and JR FPR is included. *Requires either a chip and tune, the JR MAP controller, or the JR psi switch to run.
-1500 miles used. No bearing wear, nose pulley is in good condition and spins correctly. Supercharger has had NO problems since day 1.
-Just some info. YES you can use stock injectors at 6psi using the JR MAP controller. This kit with a JR MAP controller or chipped ECU is completely bolt on. This kit will work with any Dseries.
Price: $900
Jackson Racing MAP Controller
-Used for any Jackson Racing Supercharger Setup, B/D/H series compatible.
Price: $100
Dseries Kamikaze Header
- SOLD
Omnipower 2.5" Test Pipe
- SOLD
OEM Civic Struts
http://cm.ebay.com/cm/ck/1065-...k=URL
Mfactory Anodized Red LCAs
http://cm.ebay.com/cm/ck/1065-...k=URL
H&R Sport Springs
-SOLD
Modified by SovXietday at 7:44 PM 8/13/2006
Modified by SovXietday at 7:48 PM 8/13/2006
Payment - Payment can be made via paypal to SovXietday@gmail.com. Money Order/Cashiers Check is also accepted, but paypal is preffered!
Contacts
Email: SovXietday@gmail.com
AIM: sovallstar88
PM: SovXietday
If you want to purchase, or have any questions at all, please send me a PM on here or contact me via AIM or Email! It makes it easier for me and will help you get what you want faster.
NO LOWBALLERS.
All items are plus shipping unless noted otherwise.
Dseries Jackson Racing Supercharger
-M45 Blower, 6psi pulley and a full bolt on kit. Alternator bracket, two brand new idler pullies, supercharger belt, and JR FPR is included. *Requires either a chip and tune, the JR MAP controller, or the JR psi switch to run.
-1500 miles used. No bearing wear, nose pulley is in good condition and spins correctly. Supercharger has had NO problems since day 1.
-Just some info. YES you can use stock injectors at 6psi using the JR MAP controller. This kit with a JR MAP controller or chipped ECU is completely bolt on. This kit will work with any Dseries.
Price: $900
Jackson Racing MAP Controller
-Used for any Jackson Racing Supercharger Setup, B/D/H series compatible.
Price: $100
Dseries Kamikaze Header
- SOLD
Omnipower 2.5" Test Pipe
- SOLD
OEM Civic Struts
http://cm.ebay.com/cm/ck/1065-...k=URL
Mfactory Anodized Red LCAs
http://cm.ebay.com/cm/ck/1065-...k=URL
H&R Sport Springs
-SOLD
Modified by SovXietday at 7:44 PM 8/13/2006
Modified by SovXietday at 7:48 PM 8/13/2006
Thread Starter
Honda-Tech Member
Joined: Jan 2005
Posts: 5,641
Likes: 0
From: Lower Right Hand Corner, PA
Last time I dynoed it, 146whp and 118wtq.
The kit includes everything you need to bolt it on (basically, everything I had to buy from JR after I bought the kit in the first place). It even includes the Map Controller, $150 from JR and makes the car run a lot better than the crappy pressure switch that comes in their regular kit. The only thing you might need is a few Ts, rubber hoses, various spare bolts, tools, and about 8-10 hours of your time.
The kit includes everything you need to bolt it on (basically, everything I had to buy from JR after I bought the kit in the first place). It even includes the Map Controller, $150 from JR and makes the car run a lot better than the crappy pressure switch that comes in their regular kit. The only thing you might need is a few Ts, rubber hoses, various spare bolts, tools, and about 8-10 hours of your time.
Thread Starter
Honda-Tech Member
Joined: Jan 2005
Posts: 5,641
Likes: 0
From: Lower Right Hand Corner, PA
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by akdasniper »</TD></TR><TR><TD CLASS="quote">if i scoop the sc, ill get the arms too...</TD></TR></TABLE>
No problem, and I'd be happy to take a few bucks off the arms if you do. Just let me know if you decide that you want it, I don't have a problem in taking it off before August 12th.
Feel free to PM me if you have any questions about it, condition is good, and it has about 6-7K on it. Haven't had a single problem with it since day 3. (Day 2 blew the idler pullies, so they were replaced with the improved ones from JR)
No problem, and I'd be happy to take a few bucks off the arms if you do. Just let me know if you decide that you want it, I don't have a problem in taking it off before August 12th.
Feel free to PM me if you have any questions about it, condition is good, and it has about 6-7K on it. Haven't had a single problem with it since day 3. (Day 2 blew the idler pullies, so they were replaced with the improved ones from JR)
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jan 2005
Posts: 5,641
Likes: 0
From: Lower Right Hand Corner, PA
They're great man, I love em. Thanks for the good words too.
Only problem is no one wants the EKs. 
SC is SOLD unless buyer flakes out on pickup day.
Thread Starter
Honda-Tech Member
Joined: Jan 2005
Posts: 5,641
Likes: 0
From: Lower Right Hand Corner, PA
Due to unfortunate incident on buyers end I refunded him and the header and test pipe are back for sale.
Cmon guys I know someone wants this stuff.
Cmon guys I know someone wants this stuff.


