Turboed gsr hatch
Thread Starter
Junior Member
Joined: Jun 2005
Posts: 248
Likes: 0
From: imaknow, florida, usa
Turboed gsr hatch
Parting out hatch!!
Shell 3500.00 with suspension and wheels, gsr cloth interior, JDM fogs, spoon style mirrors, 4 wheel disk breaks with drilled n slotted and steel brake lines, ek side skirts.
Turbo kit- 2000.00 spoolin ac manifold and sparks racing manifold
2 down pipes, garret rebuilt turbo with about 3000 miles on it, 450cc dsm's, chipped ecu, intercooler, bov, oil line kit, i have everything u need to boost it is all comming off the hatch plus more.
96 gsr swap, act stage 2 clutch, ferria valves, new gsr camshafts, new timing belt, water pump, ARP headstuds, skunk 2 manifold and more. head needs to be bolded up to block. (2300.00)
All this is Or Best Offer! So make some offers!
Vehicle Description
I am selling my 92 honda civic cx h/b. It is one of the cleanest hatchs you will see for the money. Its i a dark gunmetel. Has no rust at all, and only a few dings an scratchs. The one side skirt was curbed a little bit, but not to bad. For pictures email me at icanthinkofasn16@aol.com. Car Also has a small dent in fender and a little touch up paint on it not noticable and a small dent on hood with a scratch. You can see all in pictures...
Engine
gsr with gsr tranny
Mods
skunk 2 intake manifold, sparks racing turbo manifold, garret t3/t4 turbo, greddy style bov, tail wastegate an dump tube, 2.5" exhaust, Gsr rear disk brakes with drilled n slotted rotors, steel brake lines, treadstone intercooler, greddy oil adapter, auto meter boost and a/f gauges, chipped ecu running crome pro, ACT stage 2 clutch, 450cc injectors
Exterior
rota gt3's wheels ( chipped, but still look good ), carbon fiber duckbill, spoon style mirrors, Jdm fog lights, Lowered on full omni power suspension ( 1300$ new ), Interior gsr cloth font and rear seats, sony cd player with sony speakers, ex gauge cluster for tach. with clock, short shifter. Also has a drive side power window and has all wires ran through for the for the passanger side window all u need is the motor.. I ran the car for the first time on 4-19-06 and it ran a 13.9 at like 106 miles an hr. Couldn't get traction at all on bobo *** tires. Car is good for a 13.3- 13.2...
I just put in brandnew OEM head gasket, ARP head studs, water pump, timing belt. Also had a local head shop put in ferra valves. They also hot tanked the head and did a 3 angle valve job. Head also has new seels. The corner of the headgasket leaks for some reason and the oil return lines leaks a little bit too. Car will come with new oem head gasket because of its leak. It could also use new axels. I can get gator stage one axels at ur expense for 150.00$ just let me no before you pick the car up! If you have any questions please let no know. You can call me at 386-212-3252 or email me at icanthinkofasn16@aol.com. Make me an offer on the car!!
Current Pics:
Modified by jaypanEG6 at 2:32 PM 8/3/2006
Modified by jaypanEG6 at 7:34 PM 8/24/2006
Shell 3500.00 with suspension and wheels, gsr cloth interior, JDM fogs, spoon style mirrors, 4 wheel disk breaks with drilled n slotted and steel brake lines, ek side skirts.
Turbo kit- 2000.00 spoolin ac manifold and sparks racing manifold
2 down pipes, garret rebuilt turbo with about 3000 miles on it, 450cc dsm's, chipped ecu, intercooler, bov, oil line kit, i have everything u need to boost it is all comming off the hatch plus more.
96 gsr swap, act stage 2 clutch, ferria valves, new gsr camshafts, new timing belt, water pump, ARP headstuds, skunk 2 manifold and more. head needs to be bolded up to block. (2300.00)
All this is Or Best Offer! So make some offers!
Vehicle Description
I am selling my 92 honda civic cx h/b. It is one of the cleanest hatchs you will see for the money. Its i a dark gunmetel. Has no rust at all, and only a few dings an scratchs. The one side skirt was curbed a little bit, but not to bad. For pictures email me at icanthinkofasn16@aol.com. Car Also has a small dent in fender and a little touch up paint on it not noticable and a small dent on hood with a scratch. You can see all in pictures...
Engine
gsr with gsr tranny
Mods
skunk 2 intake manifold, sparks racing turbo manifold, garret t3/t4 turbo, greddy style bov, tail wastegate an dump tube, 2.5" exhaust, Gsr rear disk brakes with drilled n slotted rotors, steel brake lines, treadstone intercooler, greddy oil adapter, auto meter boost and a/f gauges, chipped ecu running crome pro, ACT stage 2 clutch, 450cc injectors
Exterior
rota gt3's wheels ( chipped, but still look good ), carbon fiber duckbill, spoon style mirrors, Jdm fog lights, Lowered on full omni power suspension ( 1300$ new ), Interior gsr cloth font and rear seats, sony cd player with sony speakers, ex gauge cluster for tach. with clock, short shifter. Also has a drive side power window and has all wires ran through for the for the passanger side window all u need is the motor.. I ran the car for the first time on 4-19-06 and it ran a 13.9 at like 106 miles an hr. Couldn't get traction at all on bobo *** tires. Car is good for a 13.3- 13.2...
I just put in brandnew OEM head gasket, ARP head studs, water pump, timing belt. Also had a local head shop put in ferra valves. They also hot tanked the head and did a 3 angle valve job. Head also has new seels. The corner of the headgasket leaks for some reason and the oil return lines leaks a little bit too. Car will come with new oem head gasket because of its leak. It could also use new axels. I can get gator stage one axels at ur expense for 150.00$ just let me no before you pick the car up! If you have any questions please let no know. You can call me at 386-212-3252 or email me at icanthinkofasn16@aol.com. Make me an offer on the car!!
Current Pics:
Modified by jaypanEG6 at 2:32 PM 8/3/2006
Modified by jaypanEG6 at 7:34 PM 8/24/2006
Trending Topics
Junior Member
Joined: Aug 2005
Posts: 341
Likes: 0
From: va beach, va, usa
i thought you posted that you just put a new head gasket and head studs on the car. and it will come with the manifold it has now and downpipe that it has now right? and how much with the carbon duckbill
Thread Starter
Junior Member
Joined: Jun 2005
Posts: 248
Likes: 0
From: imaknow, florida, usa
it does have new headgasket and arp headstuds! The headgasket leaks out of the corner of it, so i was going to included a new headgasket to get put on. It comes with the manifold and downpipe in the pictures. I will do 6300.00 with duckbill.