!!! recomended ECU for this setup...i'm thinking Hondata 3
Thread Starter
FSAE
Joined: Jan 2002
Posts: 5,495
Likes: 1
From: Drinking Beer, UT
!!! recomended ECU for this setup...i'm thinking Hondata 3
JUN stage 3's
JUN ti retainers
JUN valvesprings
Cam Gears (pre tuned for JUN stage 3's)
JDM 4-1 headers
custom test pipe
Prelude 2.2 VTEC injectors
B&M fpr & gauge
the rest of the mods are in the sig.....
what computer should i run....the skunk program will run it, but i'm not sure how well.....so i am figuring i will get either the Hondata 3, or the new DFI.....any suggestions on what would work the best?
thanks....
JUN ti retainers
JUN valvesprings
Cam Gears (pre tuned for JUN stage 3's)
JDM 4-1 headers
custom test pipe
Prelude 2.2 VTEC injectors
B&M fpr & gauge
the rest of the mods are in the sig.....
what computer should i run....the skunk program will run it, but i'm not sure how well.....so i am figuring i will get either the Hondata 3, or the new DFI.....any suggestions on what would work the best?
thanks....
Joined: Nov 2001
Posts: 31
Likes: 0
From: largo, fl, usa
Re: !!! recomended ECU for this setup...i'm thinking Hondata 3 (92TypeR)
if there is a guy in the area who is very reputable with dyno tuning on a hondata then get that..
otherwise in my personal opinion, i would get whatever system the local dyno tuners know what to tune with.
otherwise in my personal opinion, i would get whatever system the local dyno tuners know what to tune with.
Thread
Thread Starter
Forum
Replies
Last Post