F/s: 97' EK HATCH, 99' FRONT END, CLEAN TITLE, DIRT CHEAP!
Thread Starter
Honda-Tech Member
Joined: May 2003
Posts: 3,433
Likes: 0
From: Los Angeles, CA
F/s: 97' EK HATCH, 99' FRONT END, CLEAN TITLE, DIRT CHEAP!
<FONT SIZE="5">CLEAN TITLE!!!!! - LOWERED PRICE!</FONT>
<FONT SIZE="1">read the thread title, it says clean title! damn
</FONT>
FIRM price(s): $2500 w/ SI wheels & steering wheel/hub, $2300 without.
*the replacement front bumper i got was ******* stolen, so i took $50 off the price.
alrighty guys, i'm putting my hatch up for sale. i haven't had it for too long, but i've found something else that i'm going to try and pick up.
it's a 97'CX, originally red (roma? milano? no clue), 106k on the chassis. a week after i got it, i was involved in a minor accident; i rear ended a lady whose brake-lights didn't work. the damage wasn't horrible; the frame isn't tweaked or bent. the radiator support was pushed in a bit but i pulled it out as much as possible.
i pieced together a 99' SI front end (minus grill/lip) and put it on/lined it up as best i could. the pass. side headlight clips/tabs were broken when i got them, so zip-ties are holding them up. the front bumper is cracked but i'll be including a new, better condition 99' bumper with the sale. i'd suggest getting a new radiator support/tbar to replace this one as the front doesn't quite line up correctly. i've seen someone do it themselves here on h-t for pretty cheap, i just haven't had the time. other than that, the body is in great shape. it's got an ek9 hatch on with minor dents, something that could easily be taken care of before paint. the entire car is primer black as i started to work on it but have since decided to sell it.
the interior is clean. no tears on the seats, carpet is in good condition, panels are all in good condition...basically stock everything minus a sony headunit and some xplod 6x9s in the doors.
the car itself is sitting on some no-name coilovers and 99' SI wheels (or blacks).
the motor is actually a newer 98'DX motor (68k on it when swapped). mechanically, the car runs absolutely fine minus throwing 1 code (o2 sensor, haven't had time to fix it). it gets great gas mileage, has survived this ridiculous heat with no problem, and is a great all around beater/project car. the car itself still needs to be registered. it was due in april and the guy i bought it from never regged it, so it might be a little more than if had paid on time.
in some of these pics, i had the front bumper off to show the bumper support and how it's still fine, others had the bumper on to show how with the bent radiator support it doesn’t quite line up perfectly, and then toward the end, the radiator support itself (how it was bent and where the t-part toward the bottom cracked off the welds).
for any questions, feel free to contact me:
rj@uxtm.com
aim: e eff eight
PM for phone number.
rob
*i will supply the VIN to all serious inquiries.
Modified by phan at 1:28 PM 8/28/2006
<FONT SIZE="1">read the thread title, it says clean title! damn
</FONT>FIRM price(s): $2500 w/ SI wheels & steering wheel/hub, $2300 without.
*the replacement front bumper i got was ******* stolen, so i took $50 off the price.
alrighty guys, i'm putting my hatch up for sale. i haven't had it for too long, but i've found something else that i'm going to try and pick up.
it's a 97'CX, originally red (roma? milano? no clue), 106k on the chassis. a week after i got it, i was involved in a minor accident; i rear ended a lady whose brake-lights didn't work. the damage wasn't horrible; the frame isn't tweaked or bent. the radiator support was pushed in a bit but i pulled it out as much as possible.
i pieced together a 99' SI front end (minus grill/lip) and put it on/lined it up as best i could. the pass. side headlight clips/tabs were broken when i got them, so zip-ties are holding them up. the front bumper is cracked but i'll be including a new, better condition 99' bumper with the sale. i'd suggest getting a new radiator support/tbar to replace this one as the front doesn't quite line up correctly. i've seen someone do it themselves here on h-t for pretty cheap, i just haven't had the time. other than that, the body is in great shape. it's got an ek9 hatch on with minor dents, something that could easily be taken care of before paint. the entire car is primer black as i started to work on it but have since decided to sell it.
the interior is clean. no tears on the seats, carpet is in good condition, panels are all in good condition...basically stock everything minus a sony headunit and some xplod 6x9s in the doors.
the car itself is sitting on some no-name coilovers and 99' SI wheels (or blacks).
the motor is actually a newer 98'DX motor (68k on it when swapped). mechanically, the car runs absolutely fine minus throwing 1 code (o2 sensor, haven't had time to fix it). it gets great gas mileage, has survived this ridiculous heat with no problem, and is a great all around beater/project car. the car itself still needs to be registered. it was due in april and the guy i bought it from never regged it, so it might be a little more than if had paid on time.
in some of these pics, i had the front bumper off to show the bumper support and how it's still fine, others had the bumper on to show how with the bent radiator support it doesn’t quite line up perfectly, and then toward the end, the radiator support itself (how it was bent and where the t-part toward the bottom cracked off the welds).
for any questions, feel free to contact me:
rj@uxtm.com
aim: e eff eight
PM for phone number.
rob
*i will supply the VIN to all serious inquiries.
Modified by phan at 1:28 PM 8/28/2006
Trending Topics
Honda-Tech Member
iTrader: (1)
Joined: Sep 2002
Posts: 14,715
Likes: 1
From: Turning the haters into likers
Re: F/s: 97' EK HATCH, 99' FRONT END, CLEAN TITLE, DIRT CHEAP! (OB*GYN_MCxRhettxMeistern)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OB*GYN_MCxRhettxMeistern »</TD></TR><TR><TD CLASS="quote">A+ guy 
</TD></TR></TABLE>
Co-sign
</TD></TR></TABLE>Co-sign
Member
Joined: Jun 2003
Posts: 3,863
Likes: 0
From: Los Angeles, CA, 91214
Re: F/s: 97' EK HATCH, 99' FRONT END, CLEAN TITLE, DIRT CHEAP! (phan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by phan »</TD></TR><TR><TD CLASS="quote">
thanks guys
<FONT SIZE="10">NEW LOWER PRICE!!!!!!!</FONT>
buy buy buy! i'd like this gone asap...$2600 drives it away as is!!</TD></TR></TABLE>
thanks guys
<FONT SIZE="10">NEW LOWER PRICE!!!!!!!</FONT>
buy buy buy! i'd like this gone asap...$2600 drives it away as is!!</TD></TR></TABLE>
Member
Joined: Jun 2003
Posts: 3,863
Likes: 0
From: Los Angeles, CA, 91214
Re: F/s: 97' EK HATCH, 99' FRONT END, CLEAN TITLE, DIRT CHEAP! (phan)
Originally Posted by phan
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!
Originally Posted by phan
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!
Originally Posted by phan
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!
Originally Posted by phan
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!
Originally Posted by phan
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!
Originally Posted by phan
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!
Originally Posted by phan
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!
Originally Posted by phan
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!
Originally Posted by phan
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!
Member
Joined: Jun 2003
Posts: 3,863
Likes: 0
From: Los Angeles, CA, 91214
Re: F/s: 97' EK HATCH, 99' FRONT END, CLEAN TITLE, DIRT CHEAP! (L'motaHB)
Originally Posted by phan
<FONT SIZE="5">CLEAN TITLE!!!!! - LOWERED PRICE!</FONT>
<FONT SIZE="1">read the thread title, it says clean title! damn </FONT>
FIRM price(s): $2500 w/ SI wheels & steering wheel/hub, $2300 without.
*the replacement front bumper i got was ******* stolen, so i took $50 off the price.
alrighty guys, i'm putting my hatch up for sale. i haven't had it for too long, but i've found something else that i'm going to try and pick up.
it's a 97'CX, originally red (roma? milano? no clue), 106k on the chassis. a week after i got it, i was involved in a minor accident; i rear ended a lady whose brake-lights didn't work. the damage wasn't horrible; the frame isn't tweaked or bent. the radiator support was pushed in a bit but i pulled it out as much as possible.
i pieced together a 99' SI front end (minus grill/lip) and put it on/lined it up as best i could. the pass. side headlight clips/tabs were broken when i got them, so zip-ties are holding them up. the front bumper is cracked but i'll be including a new, better condition 99' bumper with the sale. i'd suggest getting a new radiator support/tbar to replace this one as the front doesn't quite line up correctly. i've seen someone do it themselves here on h-t for pretty cheap, i just haven't had the time. other than that, the body is in great shape. it's got an ek9 hatch on with minor dents, something that could easily be taken care of before paint. the entire car is primer black as i started to work on it but have since decided to sell it.
the interior is clean. no tears on the seats, carpet is in good condition, panels are all in good condition...basically stock everything minus a sony headunit and some xplod 6x9s in the doors.
the car itself is sitting on some no-name coilovers and 99' SI wheels (or blacks).
the motor is actually a newer 98'DX motor (68k on it when swapped). mechanically, the car runs absolutely fine minus throwing 1 code (o2 sensor, haven't had time to fix it). it gets great gas mileage, has survived this ridiculous heat with no problem, and is a great all around beater/project car. the car itself still needs to be registered. it was due in april and the guy i bought it from never regged it, so it might be a little more than if had paid on time.
in some of these pics, i had the front bumper off to show the bumper support and how it's still fine, others had the bumper on to show how with the bent radiator support it doesn’t quite line up perfectly, and then toward the end, the radiator support itself (how it was bent and where the t-part toward the bottom cracked off the welds).
for any questions, feel free to contact me:
rj@uxtm.com
aim: e eff eight
PM for phone number.
rob
*i will supply the VIN to all serious inquiries.
Modified by phan at 1:28 PM 8/28/2006
<FONT SIZE="1">read the thread title, it says clean title! damn </FONT>
FIRM price(s): $2500 w/ SI wheels & steering wheel/hub, $2300 without.
*the replacement front bumper i got was ******* stolen, so i took $50 off the price.
alrighty guys, i'm putting my hatch up for sale. i haven't had it for too long, but i've found something else that i'm going to try and pick up.
it's a 97'CX, originally red (roma? milano? no clue), 106k on the chassis. a week after i got it, i was involved in a minor accident; i rear ended a lady whose brake-lights didn't work. the damage wasn't horrible; the frame isn't tweaked or bent. the radiator support was pushed in a bit but i pulled it out as much as possible.
i pieced together a 99' SI front end (minus grill/lip) and put it on/lined it up as best i could. the pass. side headlight clips/tabs were broken when i got them, so zip-ties are holding them up. the front bumper is cracked but i'll be including a new, better condition 99' bumper with the sale. i'd suggest getting a new radiator support/tbar to replace this one as the front doesn't quite line up correctly. i've seen someone do it themselves here on h-t for pretty cheap, i just haven't had the time. other than that, the body is in great shape. it's got an ek9 hatch on with minor dents, something that could easily be taken care of before paint. the entire car is primer black as i started to work on it but have since decided to sell it.
the interior is clean. no tears on the seats, carpet is in good condition, panels are all in good condition...basically stock everything minus a sony headunit and some xplod 6x9s in the doors.
the car itself is sitting on some no-name coilovers and 99' SI wheels (or blacks).
the motor is actually a newer 98'DX motor (68k on it when swapped). mechanically, the car runs absolutely fine minus throwing 1 code (o2 sensor, haven't had time to fix it). it gets great gas mileage, has survived this ridiculous heat with no problem, and is a great all around beater/project car. the car itself still needs to be registered. it was due in april and the guy i bought it from never regged it, so it might be a little more than if had paid on time.
in some of these pics, i had the front bumper off to show the bumper support and how it's still fine, others had the bumper on to show how with the bent radiator support it doesn’t quite line up perfectly, and then toward the end, the radiator support itself (how it was bent and where the t-part toward the bottom cracked off the welds).
for any questions, feel free to contact me:
rj@uxtm.com
aim: e eff eight
PM for phone number.
rob
*i will supply the VIN to all serious inquiries.
Modified by phan at 1:28 PM 8/28/2006
Thread Starter
Honda-Tech Member
Joined: May 2003
Posts: 3,433
Likes: 0
From: Los Angeles, CA
Re: F/s: 97' EK HATCH, 99' FRONT END, CLEAN TITLE, DIRT CHEAP! (L'motaHB)
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!
Member
Joined: Jun 2003
Posts: 3,863
Likes: 0
From: Los Angeles, CA, 91214
Re: F/s: 97' EK HATCH, 99' FRONT END, CLEAN TITLE, DIRT CHEAP! (phan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by phan »</TD></TR><TR><TD CLASS="quote">
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!</TD></TR></TABLE>
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!</TD></TR></TABLE>
Member
Joined: Jun 2003
Posts: 3,863
Likes: 0
From: Los Angeles, CA, 91214
Re: F/s: 97' EK HATCH, 99' FRONT END, CLEAN TITLE, DIRT CHEAP! (L'motaHB)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by phan »</TD></TR><TR><TD CLASS="quote">
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!</TD></TR></TABLE>
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!</TD></TR></TABLE>
Member
Joined: Jun 2003
Posts: 3,863
Likes: 0
From: Los Angeles, CA, 91214
Re: F/s: 97' EK HATCH, 99' FRONT END, CLEAN TITLE, DIRT CHEAP! (L'motaHB)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by phan »</TD></TR><TR><TD CLASS="quote">
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!</TD></TR></TABLE>
ok guys, i want this thing gone. i'm now asking $2500 FIRM, as is. if you're interested and want it, plan on paying $2500 because i will sit on this price until she's sold. BUMP!</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
phan
Southern California (Sales)
7
Oct 3, 2006 05:15 AM
phan
Southern California (Sales)
20
Sep 19, 2006 10:42 AM