Whats the loudest Exhaust you guys have herd on a lude. So far i herd my homies bb6 with an HKS Carbon TI 2.5" piping hi flow cat and no res. i could hear him bout 3 blocks away. You guys know any louder?


P.S im also thinking about getting a ES tuning Oval Exhaust 2.5 piping and no res. Stock cat. i have a jdm h23 in my bb2. Anyone herd this exhaust??

 

Jdm h22a
stock jdm header and downpipe
fleabay cat
apexi N1
LOUD is an understatment.
Anything below engagment isnt That loud but holly **** it gets really fn loud.

98vtec's is loud in his videos, his sounds good and hauls(rmf )

Check out the offical prelude exhaust thread for some sound clips of many exhausts.

 

when I did my first h22 I had to run open header for a day. when I did my second prelude I had to run no cat and a resonator for about a week.

I think both of those where the loudest h22s I have heard.

 

http://s23.photobucket.com/alb...8.flv

 

Loudest I've heard was a test pipe with an OBX 3" exhaust without a resonator. Worst sounding loud is mine. Pacesetter without a resonator (soon to have a resonator)

 

I have a Skunk2 on a completely stock 5th gen (not for long ) and i think it really loud especially on long trips. My girlfriend says she can hear me in her house when i turn on to her street, witch i would say is a couple of blocks away.

 

I think loud exhaust is rice. It needs to sound good under WOT but not drone when cruising.

 

tanabi racing medallion, japanese version..........LOUD AS ****!!!!! but quiet when below 3K rpm than it rattles your brain

 

thats y i wish my lude had a 6th gear. freeway gear to drop the rpms. at 80mph rpm is bout 4k

 

Thats why u go with Apexi WS2 ive had it for a yr now and LOVE IT. SILENT under partial throwttle and nice loud note in vtec.

 

open header...there is no louder

 

apex world sport is a waste of money, but that's just my opinion

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I got the CD5 Jeebies! &raquo;</TD></TR><TR><TD CLASS="quote">open header...there is no louder</TD></TR></TABLE>

except for open exhaust ports who needs a header anyway.

that would be interesting to hear

 

If you plan on running without a resonator, your exhaust is going to sound like ***. You'll get the stereotypical "angry bees" sound and everyone on the road will laugh at you for being a stupid ricer
A good resonator will cause you to lose 1whp or less compared to straight pipe - use one!

I'd recommend this setup:

2.5" Magnaflow cat, 14" long stainless steel Magnaflow resonator (2.5" diameter), and a 2.5" Magnaflow or ES Tuning muffler. It would also be smart to buy a stainless steel 2.5" tubing kit from a place like kteller.com so that you have nice mandrel bent pipe to work with - all the exhaust shop has to do then is cut and weld. this should give you a moderately loud but smooth exhaust tone and should have enough flow to support any mods you could do to an H23.

 

you/anyone else know about apexi n1 with the Si's h23a1? Still loud?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I got the CD5 Jeebies! &raquo;</TD></TR><TR><TD CLASS="quote">open header...there is no louder</TD></TR></TABLE> bump. i agree when i had my integra i had to drive it 1 day with no exhaust just open header. WOW

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HxClude &raquo;</TD></TR><TR><TD CLASS="quote">If you plan on running without a resonator, your exhaust is going to sound like ***. You'll get the stereotypical "angry bees" sound and everyone on the road will laugh at you for being a stupid ricer
A good resonator will cause you to lose 1whp or less compared to straight pipe - use one!

I'd recommend this setup:

2.5" Magnaflow cat, 14" long stainless steel Magnaflow resonator (2.5" diameter), and a 2.5" Magnaflow or ES Tuning muffler. It would also be smart to buy a stainless steel 2.5" tubing kit from a place like kteller.com so that you have nice mandrel bent pipe to work with - all the exhaust shop has to do then is cut and weld. this should give you a moderately loud but smooth exhaust tone and should have enough flow to support any mods you could do to an H23.</TD></TR></TABLE>


Perfect Setup i love it. thoes are my plans to a T. WEll said

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">apex world sport is a waste of money, but that's just my opinion </TD></TR></TABLE>


& that is why?

 

restrictive

 

O ok.

 

I have an ES oval with a cat 2.5 inch piping, but no resonator. Its pretty loud. However every decent import enthusiest that I know really like the way my car sounds. The ES has a nice tone to it.

 

the loudest, most annoying exhaust i have ever heard isn't on a lude, but my dumbass friend's teg. it's an aero with 4" piping on a na car. the kid's an idiot.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EOE &raquo;</TD></TR><TR><TD CLASS="quote">Thats why u go with Apexi WS2 ive had it for a yr now and LOVE IT. SILENT under partial throwttle and nice loud note in vtec.</TD></TR></TABLE>

x2

 

My lude was loud as hell when I first had it done I did a custom exhaust I had 2.5 in. cat back with a Apexi N1 style muffler and then I couldnt take the whiney raspy bumble bee sound anymore so a week later got a magnaflow resonator put on and it sounds GREAT!!!! I love it not to loud but jus right and perfect tone to it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ECX &raquo;</TD></TR><TR><TD CLASS="quote">you/anyone else know about apexi n1 with the Si's h23a1? Still loud?</TD></TR></TABLE>
bump?