Engine Swap
Hello all,
I am currently gonna purchase a 89 crx. What is the best set up as far as engine swapping? I will have about 3000 to start the engine building. I just want a good solid starting point. More mods will be added later but I need a starting point. Any suggestions?
Thanks
I am currently gonna purchase a 89 crx. What is the best set up as far as engine swapping? I will have about 3000 to start the engine building. I just want a good solid starting point. More mods will be added later but I need a starting point. Any suggestions?
Thanks
For about 1200 you could put it a ZC or Sohc Vtec motor.
For about 1800 you could do a bare bones b16 swap.
For about the same price you could also do the b18a swap
For about 2500-3000 you could do a very nice b16 swap.
I did a b16 and it cost me about 3000. Here is what I used:
B16a, Pr3 ecu, S1 transmission
Hasport billet mounts and shift linkage
raxles.com stage 1 hybrid axles
new radiator
Clutchmasters stage 1 clutch
timing belt, water pump, cap and rotor, thermostat, plugs and wires, fuel filter
New crank pulley and alternator pulley
Misc. gaskets, hoses, and fluids
So it came out between 2800-3000
[Modified by 91civic, 6:18 PM 4/22/2002]
For about 1800 you could do a bare bones b16 swap.
For about the same price you could also do the b18a swap
For about 2500-3000 you could do a very nice b16 swap.
I did a b16 and it cost me about 3000. Here is what I used:
B16a, Pr3 ecu, S1 transmission
Hasport billet mounts and shift linkage
raxles.com stage 1 hybrid axles
new radiator
Clutchmasters stage 1 clutch
timing belt, water pump, cap and rotor, thermostat, plugs and wires, fuel filter
New crank pulley and alternator pulley
Misc. gaskets, hoses, and fluids
So it came out between 2800-3000
[Modified by 91civic, 6:18 PM 4/22/2002]
dont get a dx.....get a si or hf.....because the dx only has two fuel injectors.....so therfore no matter what swap u do u will need a new harness.....i had a hf with b16a i/h/e/high flo cat was really quick
Trending Topics
It would be extremely quick. I have seen some built crvtec setups with a nice set of cams putting down close to 225 at the wheels all motor. Check out http://www.importbuilders.com
I think thats what Im gonna do. Does anyone have any prices for what a b20b block and a b16a head are gonna cost?? Also what are additional costs involved?
Thanks for any info.
Thanks for any info.
It would be extremely quick. I have seen some built crvtec setups with a nice set of cams putting down close to 225 at the wheels all motor. Check out http://www.importbuilders.com
that are worth more than some cars values. $8k +++
Thread
Thread Starter
Forum
Replies
Last Post
TURBODEEZ
Honda CRX / EF Civic (1988 - 1991)
14
Sep 19, 2020 07:22 PM
fishin9975
Honda CRX / EF Civic (1988 - 1991)
3
Mar 28, 2004 10:21 PM



