i recently had my front tie rods replaced and an allignment done on my 98 crv. since then when i hit about 80 mph my stearing wheel and dash start shaking. sometimes it will subside if i go below 78 or above 85. do i need to get realligned?

 

there are a few things i would check along with the alignment
#1 tire balance and condition
#2 axle condition
#3 then the alignment.

Possibly slowing down could help too

 

i agree with the balance issue, the rule of thumb i was taught is if you can accelerate into and out of the vibration then more than likely it is a balance issue

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by satsilprelude &raquo;</TD></TR><TR><TD CLASS="quote">i agree with the balance issue, the rule of thumb i was taught is if you can accelerate into and out of the vibration then more than likely it is a balance issue
</TD></TR></TABLE>

x2

 

Had a similar problem on my car, turned out to be a small bend in the front right alloy rim - where apparently a curb attacked the rim!

 

Did you ever find out what the problem was, please update.

Thank you.