Thought you guys might like to see where my R's engine ended up...
Thread Starter
Member
Joined: Jun 2005
Posts: 1,637
Likes: 0
From: Northern, CA, USA
Thought you guys might like to see where my R's engine ended up...
Well guys I wrecked my R earlier this year but it's enigne and brakes found a good new home H1 Honda Challenge civic
more info here https://honda-tech.com/zerothread?id=1690210
more info here https://honda-tech.com/zerothread?id=1690210
DrinkerTrending Topics
Honda-Tech Member
Joined: Jun 2005
Posts: 562
Likes: 0
From: Va Beach, VA, USA
Re: Thought you guys might like to see where my R's engine ended up... (ekim952522000)
-one of the few times an ITR motor ends up in a civic without thieves touching it.
Looks good man... that thing should scoot.
Looks good man... that thing should scoot.
Member
Joined: Jan 2006
Posts: 2,034
Likes: 0
From: No Sto, CT, USA
Re: Thought you guys might like to see where my R's engine ended up... (dsav4shawn)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dsav4shawn »</TD></TR><TR><TD CLASS="quote">-one of the few times an ITR motor ends up in a civic without thieves touching it.
Looks good man... that thing should scoot. </TD></TR></TABLE>
thats good ****. paint looks effing nice!
Looks good man... that thing should scoot.
</TD></TR></TABLE>thats good ****. paint looks effing nice!
Thread Starter
Member
Joined: Jun 2005
Posts: 1,637
Likes: 0
From: Northern, CA, USA
Re: Thought you guys might like to see where my R's engine ended up... (kiddcarbuff)
THe motor and tranny are completely stock inside for now I have a comptech tech race header with kingmotorsports exhaust and a AEM hybrid intake
Suspension is tein super racing circuits, with skunk2 camber kits and comptech rear sway and suspension techniques front sway bar. earls stainless lines, cobalt friction brakes, ans spoon calipers, Wheel's are buddyclub p1 QF's (and they clear the calipers with no spacers if someone wants to add them to the list)
anything else ya wann know let me know
Suspension is tein super racing circuits, with skunk2 camber kits and comptech rear sway and suspension techniques front sway bar. earls stainless lines, cobalt friction brakes, ans spoon calipers, Wheel's are buddyclub p1 QF's (and they clear the calipers with no spacers if someone wants to add them to the list)
anything else ya wann know let me know
Re: Thought you guys might like to see where my R's engine ended up... (extrah)
Stock C5? I'm assuming you're going to do your first season getting the bugs out then?
Thread Starter
Member
Joined: Jun 2005
Posts: 1,637
Likes: 0
From: Northern, CA, USA
Re: Thought you guys might like to see where my R's engine ended up... (ekim952522000)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Aquafina »</TD></TR><TR><TD CLASS="quote">Stock C5? I'm assuming you're going to do your first season getting the bugs out then?</TD></TR></TABLE>
Going to make sure everything runs right first, but will be throwing CTR pistons and spec c's in with toda flywheel and quifie LSD and ATS 4.9 final drive, within about 3 months.
already have hondata s300 for tuning
Going to make sure everything runs right first, but will be throwing CTR pistons and spec c's in with toda flywheel and quifie LSD and ATS 4.9 final drive, within about 3 months.
already have hondata s300 for tuning
Honda-Tech Member
iTrader: (1)
Joined: Oct 2005
Posts: 9,716
Likes: 3
From: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
Re: Thought you guys might like to see where my R's engine ended up... (ekim952522000)
Looking good If you out here hit me up and bring the cart, I got a couple too, 125 shifter and a 100hpv both are ptk.
If you out here hit me up and bring the cart, I got a couple too, 125 shifter and a 100hpv both are ptk.
Thread
Thread Starter
Forum
Replies
Last Post