<U>PLEASE READ THE WHOLE DESCRIPTION</U>, I'VE HAD A LOT OF QUESTIONS THAT CAN BE ANSWERED BY SIMPLY READING!

Here's the deal, I'm moving shops and no longer have the need or want to store these items. Must sell fast, first come first serve. I'm not holding anything for anyone, cash talks; the sooner the better. Prices are firm. Pickup only, I'm extremely busy and have no time to meet anyone anywhere. <U>All items located in Chico, Ca.</U> Can be picked up at my shop. WILL NOT SHIP, please stop asking me to ship these items; I've gotten so many PMs about shipping even when I've stated no shipping.

K20A/A2/A3/Z1 DC Race header, obviously not street legal. You DC5/EP3 guys know how great this header is. Used for 15k miles, in great condition. Only minor scuffs on it are from install and removal. $175



B16A 2nd gen head, machined and surfaced for LS/VTEC or B20/VTEC conversions. Already has Portflow valve springs and retainers installed with a small port job. NO CAMS. Not pictured but it comes with valve cover, all cam caps and LS/VTEC dowel pins. Ready for any performance cams of your choice. No dizzy or cams, do not ask. $200




D15Z1, was running when pulled but smoked a small bit during start up. Consider it a long block, does not have any acessories on it except for valve cover, oil pan and whatever you see there in the picture. $25-SOLD


2nd gen B16A intake manifold. No throttle body but does have IAC motor and IAT sensor attached. $25


Email me at asiantrashracing@gmail.com with any inquiries. Serious people willing to PICK UP only. Will not ship or drive to meet anyone.


Modified by DavidT or VajT at 6:24 AM 7/13/2006


Modified by DavidT or VajT at 12:10 PM 7/15/2006


Modified by DavidT or VajT at 11:40 AM 7/23/2006

 

Bump for the night.

 

good price on the head
if i had a car to use it with id jump all over it
maybe i will
but id have to find an a2 block for it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by buckNasty &raquo;</TD></TR><TR><TD CLASS="quote">good price on the head
if i had a car to use it with id jump all over it
maybe i will
but id have to find an a2 block for it</TD></TR></TABLE>

Umm, the head is a B16A head. If you mean the header...you don't need a A2 block for it

 

Top

 

Trades considered for WM5 PPC phone or other gadgets.

 

pm'd

 

pm i want the b16 head

 

good price on the head...

 

where are you located for the header ? ill give you 150 for it

 

Bump. All PM's replied. For much faster response, please email me at email address in the 1st post. It gets forwarded to my phone so I get it instantly and can reply faster.

Remember, I cannot ship any of these items I don't have the time to box it and wait in line at the post office. Pickup only and the prices are firm.

 

Top

 

Will trade multiple items for cool 4x100 or 5x114.3 lug pattern wheels.

 

bump

 

Top

 

sohc $25

 

Top. Very fast SOHC is sold.

 

pmed

 

Replied. A friendly reminder, this head will ONLY work on a ls or B20 block. VTEC oil passage has been filled and machined, will not work on B16/GSR/ITR blocks.

 

damm only if u were near san jose i will pick that b16 head asap....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DavidT or VajT &raquo;</TD></TR><TR><TD CLASS="quote">Replied. A friendly reminder, this head will ONLY work on a ls or B20 block. VTEC oil passage has been filled and machined, will not work on B16/GSR/ITR blocks.</TD></TR></TABLE>

I think I might pick it up.

How far is chico from vallejo?


Modified by Mr. Famadico at 1:09 AM 7/23/2006

 

Mr. Famadico, Vallejo from Chico is roughly 2 hours. 1 1/2 on a good day w/no traffic.

 

Thanks. I'll keep that in mind.