Well im in the middle of putting my 96ek hatch together and have had nothing but problems... all fixed excpet H&r

Shitty DX mani had a crack in it!!! Thank god i found one used.

99 front end didnt want to go one without some major teaking.

Fake type r seats (NRG) install was terriable, kyo seat brakets didnt line
up for **** .

Ex cluster..upon install the mounts that hold the screws in place
got broke off.

Stereo install messed with my alarm and didnt want the car to start for
two days.

My ex arm rest console was the only thing that went smooth

Now here's my next problem..installed my Illuminia's with h&r sports and the rear passangers side had a 3 finger gap the driver's rear has two? After searching i Come to find out thats the way our cars sit and now i have to spend more money on some coliovers just to level out the problem. WTF

 

Is there even a question here or just alot of bitchin' and moanin'? Just fix whats wrong (the right way) and call it good. Good luck

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondakevin21 &raquo;</TD></TR><TR><TD CLASS="quote">Is there even a question here or just alot of bitchin' and moanin'? Just fix whats wrong (the right way) and call it good. Good luck </TD></TR></TABLE>

he's just bitching...

 

I would let the springs settle until you "officially" bitch.

 

I guess my question is there anything i can do to fix my uneven drop, after reading about simuilar situations it seems that this is just normal?

The rear passanger side has a 3 finger gap the drivers side has 2 finger gap im gonna reinstall the rear passanger side and maybe that'll fix the problem?

Any suggestions or anybody out there who experianced the same?