My dynosheet ... I'm happy
Thread Starter
New User
Joined: Aug 2001
Posts: 449
Likes: 0
From: Durham, NC, USA
My dynosheet ... I'm happy
I just picked up my car. It's a h23 turbo with a SFP manifold, custom intercooler piping, custom 3" closed loop downpipe and exhaust, hondata 3b, and a completely stock engine. Everything except the clutch was installed by me. The green run is baseline, red is 7 psi, and blue is 10 psi. Thanks to Mark at turbotune for the tuning.
[Modified by SilverLudeSi, 8:50 PM 4/18/2002]
[Modified by SilverLudeSi, 8:50 PM 4/18/2002]
Trending Topics
Thread Starter
New User
Joined: Aug 2001
Posts: 449
Likes: 0
From: Durham, NC, USA
Re: My dynosheet ... I'm happy (DIRep972)
The exhaust is a stage 3 .63 a/r. I am a little confused about the compressor, because I got it from majestic and it is definitely a B housing. They listed the wheel as a B super v, but it only has 6 main blades. I remember him saying something about trimming down an e wheel though to fit in the b housing. Maybe someone can clarify this for me. Here's a pic of the compressor.
[Modified by SilverLudeSi, 9:20 PM 4/18/2002]
[Modified by SilverLudeSi, 9:20 PM 4/18/2002]
Thread Starter
New User
Joined: Aug 2001
Posts: 449
Likes: 0
From: Durham, NC, USA
Re: My dynosheet ... I'm happy (Arturbo)
Cool, thanks art. Do you have any idea what the trim is then? Here is what the sheet majestic sent me says: .63 S/3 w/c TO4B c/h = V c/W.
Honda-Tech Member
Joined: Jan 2000
Posts: 2,374
Likes: 0
From: DFW, TX, USA
Re: My dynosheet ... I'm happy (Strng1dah)
good #'s 
ive had mark from turbotune dyno and tune my GSR (n/a) and he knows his shiat.
id like to see a dyno sheet from one of his grand nat'l's that he has in his garage.
ive had mark from turbotune dyno and tune my GSR (n/a) and he knows his shiat.
id like to see a dyno sheet from one of his grand nat'l's that he has in his garage.
Thread Starter
New User
Joined: Aug 2001
Posts: 449
Likes: 0
From: Durham, NC, USA
Re: My dynosheet ... I'm happy (blkDOHCsol)
Thanks everyone. I have been out driving around tonight obviously - man, 10 psi is a little scary. I can't imagine what 15 or 20 would feel like (maybe i'll know in the future 
). The motor is the one that came in the car and is only just about to hit 68k.
). The motor is the one that came in the car and is only just about to hit 68k.
Member
Joined: Aug 2001
Posts: 1,107
Likes: 0
From: Tempe, AZ, USA
Re: My dynosheet ... I'm happy (SilverLudeSi)
Cool, thanks art. Do you have any idea what the trim is then? Here is what the sheet majestic sent me says: .63 S/3 w/c TO4B c/h = V c/W.
.63 A/R Turbine Housing
Stage III Turbine
Standard T04B Compressor Housing
V Trim Compressor Wheel
Thread Starter
New User
Joined: Aug 2001
Posts: 449
Likes: 0
From: Durham, NC, USA
Re: My dynosheet ... I'm happy (TurbochargedSER)
Cool, thanks art. Do you have any idea what the trim is then? Here is what the sheet majestic sent me says: .63 S/3 w/c TO4B c/h = V c/W.
T3/T04B
.63 A/R Turbine Housing
Stage III Turbine
Standard T04B Compressor Housing
V Trim Compressor Wheel
T3/T04B
.63 A/R Turbine Housing
Stage III Turbine
Standard T04B Compressor Housing
V Trim Compressor Wheel
Thread
Thread Starter
Forum
Replies
Last Post