Missing plug from firewall/fender to door speaker
Ok got some component speakers, put in the driver side one but just now got around to putting the passenger side one in. And it doesn't work. Tested it on my house speaker and the speaker works so it wasn't the speaker itself that didn't work... Looked closer in the door and found that the wires/plug that goes back into the firewall is gone.
So where does it lead to back in the firewall/fender? I'm going to pull off my fender to see if it's back there.
So where does it lead to back in the firewall/fender? I'm going to pull off my fender to see if it's back there.
MM&Y of car?
The other end of plug should be in your kick panel as the harness runs from the door into the car close to the "A" pillar about 12" up from the cars floor on most Honda/Acuras.
94
The other end of plug should be in your kick panel as the harness runs from the door into the car close to the "A" pillar about 12" up from the cars floor on most Honda/Acuras.
94
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fcm »</TD></TR><TR><TD CLASS="quote">MM&Y of car?
The other end of plug should be in your kick panel as the harness runs from the door into the car close to the "A" pillar about 12" up from the cars floor on most Honda/Acuras.
94</TD></TR></TABLE>
Sorry I always forget to add that
But yeah I found, it was behind my fender. Thanks though
The other end of plug should be in your kick panel as the harness runs from the door into the car close to the "A" pillar about 12" up from the cars floor on most Honda/Acuras.
94</TD></TR></TABLE>Sorry I always forget to add that
But yeah I found, it was behind my fender. Thanks though
Thread
Thread Starter
Forum
Replies
Last Post



