JDM "AS RARE AS ANY PART CAN BE" HKS OBD-0 EF ,OEM harness's Fuel manag..
I purchased this PFC-FCON from a guy in Japan. It is made for 88-91 EF'S.
Heres what they have to say about it on http://hksusa.com/categories/?id=1923..
"quote"
"The HKS PFC F-CON is a plug-in fuel management system designed to supplement and refine the OEM fuel curve to maintain a proper air/fuel mixture when increasing boost pressure in turbocharged applications. The PFC F-CON optimizes the factory injector pulse width signal by recalibrating information obtained by both the PFC F-CON absolute pressure sensor and the OEM engine control unit (ECU). Each unit is application specific and includes a preprogrammed ROM for a particular performance stage."
It is a clean piece of Fuel managment that performs to and is a Collector piece to make an EF jdm.. YOU WILL NOT FIND ANY OTHER EF WITH ONE..
Unplug the large ECU harness, plug into the HKS harness, reinsert the HKS harness.
Plug and play, NO wires to cut.. run the supplied denso pressure sensor "cost of $150 for the sensor" and tap a vaccum/boost line..
They sell for $1095.00-$1395.00 for US turbo cars..
I am selling it for $450.00 obo email for ANY questions.. IM YUMVTEC if you need a vouch. clean stuff..
Modified by wyomingcrx at 10:32 PM 6/30/2006
Heres what they have to say about it on http://hksusa.com/categories/?id=1923..
"quote"
"The HKS PFC F-CON is a plug-in fuel management system designed to supplement and refine the OEM fuel curve to maintain a proper air/fuel mixture when increasing boost pressure in turbocharged applications. The PFC F-CON optimizes the factory injector pulse width signal by recalibrating information obtained by both the PFC F-CON absolute pressure sensor and the OEM engine control unit (ECU). Each unit is application specific and includes a preprogrammed ROM for a particular performance stage."
It is a clean piece of Fuel managment that performs to and is a Collector piece to make an EF jdm.. YOU WILL NOT FIND ANY OTHER EF WITH ONE..
Unplug the large ECU harness, plug into the HKS harness, reinsert the HKS harness.
Plug and play, NO wires to cut.. run the supplied denso pressure sensor "cost of $150 for the sensor" and tap a vaccum/boost line..
They sell for $1095.00-$1395.00 for US turbo cars..
I am selling it for $450.00 obo email for ANY questions.. IM YUMVTEC if you need a vouch. clean stuff..
Modified by wyomingcrx at 10:32 PM 6/30/2006
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
illdb8
Classifieds: Forced Induction
7
Aug 22, 2006 08:59 PM
illdb8
For Sale
12
Feb 22, 2006 09:02 AM
illdb8
Classifieds: Forced Induction
20
Nov 1, 2005 04:24 PM




