Modified by CardDealer at 9:44 AM 11/16/2006

 

Try a Honda dealer.

Super High Temp Urea Grease: P/N: 08798-9002

They come in a little 1.75oz white plastic jar.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by whitewonder &raquo;</TD></TR><TR><TD CLASS="quote">Try a Honda dealer.

Super High Temp Urea Grease: P/N: 08798-9002

They come in a little 1.75oz white plastic jar. </TD></TR></TABLE>

and they last FOREVER

ive had mine for probably 5 years, granted ive only done about 7 or 8 clutches but ive still got a fair bit of that stuff left.

 

where on the clutch install is it used?

 

the 2 pivot points on the fork (where slave makes contact and where the fork actually pivots on the transmission)
the nose of the input shaft (where it goes into the pilot bushing)
and the stalk of the input shaft behind the splined part.

never hurts to grease the end of the fork where the throwout bearing sits too (part where the spring clip holds the TOB onto the fork)

 

I use the Moble 1 Synthetic grease, its says about 300 degrees it that any good???

 

Modified by CardDealer at 9:44 AM 11/16/2006

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by schlit &raquo;</TD></TR><TR><TD CLASS="quote">

No kidding. My honda dealer here looked at me like I was crazy when I asked for the stuff. Maybe next time I'll bring the part number.</TD></TR></TABLE>

I've had to come behind the counter and show parts guys what I wanted on more than one occasion.

 

It's no wonder that the parts person might look at you like your crazy.

 

http://www.3rd1000.com/urea/urea.htm

 

Dealers don't always hire folks who care about the cars.