I have 16's on my GSR now wrapped with 205/40's. They don't rub at all. I really want to move up to a 17" again with 205/40's. Think I'll be facing any rubbing problems?? Here is what my car looks like with the 16" Konig Tuners...

 

205/40-16 is an inch smaller in diameter than 205/40-17, so the 17" tire will be 1/2" closer to the fenders. The car will also be 1/2" higher off the ground.

 

Soooo....anyone have 17's with these springs?

 

my 16's were rubbing with those springs. and i am on AGX's. needless to say i got rid of those springs. i dont recommend them

 

What size tires where you running? I'm on GR-2 shocks with no rubbage whatsoever, not even during autocrosses.

 

Yeah, mine rubbed with Neuspeed Race Springs....only in the front though. I had to borrow my friend's set of Neuspeed Sport ones for a few weeks until I sold my wheels and tires and bought 16" Rotas.

I wouldn't get them. Get Neuspeed Sport....they look just as good.

 

So when you got your 16's, did the rubbing stop?

 

im running 205/50/16's.

 

no rubbing here with my tokico illuminas + neuspeed race...but im on stockers

 

After I put my 16"s on and my Race springs back on, there was no rubbing.

 

I used to have em on 17s and my boss still does. You will experience minor rubbing during hard cornering with the wheel cranked all the way to one side. Something you may want to seriously consider if you auto x.

 

I'm surprised you're not rubbing now, 205/50-16 is what I had on my old car, it's about an inch larger in diameter than stock Integra tires.

 

i have better springs now. im not as low, but my car looks slammed because of my kit. im on 5zigen springs w/ AGX's.

 

I had 17's with race springs. Had to take out the fenderlining. Too low for me so i went with GCs.

 

Dammit...I had my mind set on 17's, but I guess I'd better stick with 16" wheels since I already know that they won't rub...

 

i used to have neuspeed race springs and 17" rims on my car....the front tires rubbed...not on the fender but on the inside when you make full turns...

 

same here i rubbed only when doing a full right hand turn @ 50 mph. or when i was rollin deep with like four ppl in my car. But when i was by myself driving i didnt rub at all. car was too high so i decided to cut mt Race springs and it dropped another inch. **** was slammed.

 

It's weird...my stock wheels would rub with the wheel turned all the way to the right, but the 16's don't rub at all? I guess the offset of the 16's has something to do with this?

 

your car was too high? on nuespeed race springs?!! and u cut them?!!!!!!!!!!!!

 

lol, bye bye spring rates

 

I had a friend who did this in his Civic... Cut race springs, we'd routinely have to lift his car over speed bumps.. Got old real quick.