Wassup Peepz!...Im a brand new memeber to this sight..Ya, A Newbie!..But wutevers Bruh!....I've been messin with Honda's since the early 90's...I've had all kinds of Honda's & Acura's...Anywayz, i was wondering if there's anybody out there that has a little expierience in messing with the power window wiring for the crx...I have a 90 CRX DX (Glass Roof) USDM...It pretty much has all JDM parts on it except for the right hand drive (which I don't care for)... All I have left is the power windows with switches and Im done...I've already wired the Factory fog lights and Bumper Pole..

Here's wut's going on....I have a clean set of Black 91 EF8 doors with decals DOHC on the side and all..These are complete doors with Kanji door panels and power folding mirrors,swithches & all..

Now, I have a set of EDM sir door panels (left hand drive), they are black leather with red on it.I also have the EDM left & right Regulators(power of course) and Switches for Right hand drive...

So far, I removed the glass and regulators,kanji panels,switches and all out of the JDM SIR doors that I have..It was so clean that the Plastic on the inside of the panels had never been tore until i got into it!..

What I plan to do is put the EDM regulators & wiring,folding mirror wiring onto the JDM SIR doors I have...Of course, I have to flip flop & take the wiring from the JDM regulator wiring & connect to the EDM wiring....

My problem is on my JDM doors, I see the original wiring coming out at the end of the doors(near the Hindge's where you would bolt to the car) They cut them right before they go into under the dash...The JDM left side door (passenger) has like 14 wires comin out...The JDM Right side has like 16 wires comin out...

Please, if anybody knows how to connect these wires so that I could get it to work would be greatly appreciated...Or even a website where I could copy the wiring and installation.. I wish i could get the jdm wiring from the doors into the dash...Thanx fellaz!