ok, so i've been in the process of building a couple motors at the same time and have since bought a new car for a daily driver and am only building one motor for myself now. i have aquired so many h series parts over the past 6 months it's ridiculous! now i have soooo much extra stuff that i'm not going to use since i only plan to build one motor now. all parts are located in NC (28540) and some prices do not include shipping. most smaller items will be shipped flat rate priority usps, and larger items will be shipped ups ground. i will try to get pics of everything this weekend (although it will probably take the whole weekend to get pictures of all this stuff, lol). list will be updated frequently and i'm sure A LOT more stuff will be added as i go through all of this stuff at my shop.

<FONT SIZE="18">
<FONT COLOR="green">H22 STUFF</FONT></FONT>

-complete jdm h22 head (intake manifold, t/b, all sensors, valve cover, etc.) ready to bolt on to a block. 450 plus shipping

-bare h22 head with all caps, rails, bolts, and valve guides only (absolutely no internals). 150 plus shipping <FONT COLOR="green">SOLD</FONT>

-brand new ferrea h22 valves (stock size). 180 shipped

-brand new h22 std. type s pistons with rings (A pistons). 250 shipped

-brand new h22 oem valve guides (all 16, 8 bucks each from honda!). 100 shipped

-3 used h22 eagle h-beam rods (can order single rod from eagle). 120 shipped <FONT COLOR="green">SOLD</FONT>

-h22 skunk2 stage2 cams (less than 200 miles, perfect condition). 500 shipped

-h22 m2b4 jdm lsd tranny. 800 plus shipping

-jdm obd1 h22/h23 internal coil dizzy, mint! 90 shipped

-h22 vtec solenoid with pressure switch, mint! 45 shipped

-password jdm cf powerchamber (only 4k miles on intake/filter). 130 shipped

-h/f series act stage 3 disc clutch/pp kit (less than 3k miles). 200 plus shipping

--tons and tons of misc universal h22/h23 parts (oil pumps, pans, balance shafts, etc.)


<FONT SIZE="18">
<FONT COLOR="green">H23 STUFF</FONT></FONT>

-complete h23 longblock (mild spun bearings but crank is fine. willing to seperate head/block, head is perfect and comes with intake manifold, tb, and missing iacv and tps sensors. 300 for complete motor, or 200 for head, 200 for complete shortblock plus shipping.

-freshly balanced/polished h23 crank (had to turn one rod journal down, comes with oversided bearing set for that journal). 250 plus shipping (paid more than that in machine work alone on the crank <FONT COLOR="green">SOLD</FONT>

-bare h23 block with mains/girdle (fresh from machine shop with crank). hot tanked, line hone checked, surface checked, stock frm sleeves in perfect shape. 250 plus shipping (paid over 500 bucks in machine work/services on the block and crank together, so i'm basically just selling to cover what i paid in work on the parts. <FONT COLOR="green">SOLD</FONT>

-brand new h23 probe i-beam rods. 230 shipped

-jdm obd1 h22/h23 internal coil dizzy, mint! 90 shipped

-h23 megan racing header with modded 2.5" collector and flex pipe. 200 plus shipping

-password jdm cf powerchamber (only 4k miles on intake/filter). 130 shipped

-h/f series act stage 3 disc clutch/pp kit (less than 3k miles). 200 plus shipping

-tons and tons of misc universal h22/h23 parts (oil pumps, pans, balance shafts, etc.)


<FONT SIZE="18">
<FONT COLOR="green">TURBO STUFF</FONT></FONT>

-precision sc61 with less than 3k miles on it (.63 a/r p trim exhaust wheel, good to over 600whp) 600 plus shipping <FONT COLOR="green">SOLD</FONT>

-rc 750cc injectors with less than 3k miles (low impedance/peak hold) 250 shipped. <FONT COLOR="green">SOLD</FONT>

-blitz bov mounted on pretty much universal 2.5" ss upper charge pipe. 150 plus shipping

lots more to come, that's all i can think of for now


Modified by therealPROJEKTEG at 5:28 AM 6/16/2006


Modified by therealPROJEKTEG at 5:32 AM 6/16/2006


Modified by therealPROJEKTEG at 9:08 AM 6/16/2006


Modified by therealPROJEKTEG at 9:07 AM 7/3/2006


Modified by therealPROJEKTEG at 8:16 AM 7/18/2006

 

up

 

up!! i can't believe nobody wants any of this stuff! pics available upon request, i really don't feel like taking pics of everything unless someone is interested.....

 

bump for good suff

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sikciv666 &raquo;</TD></TR><TR><TD CLASS="quote">bump for good suff</TD></TR></TABLE>

thanks man

 

friday night just got pulled over because my civic fit the description of a get away vehicle from a stabbing incident bump

 

well, did you do it?

PM'd you

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by optikal_blitz &raquo;</TD></TR><TR><TD CLASS="quote">well, did you do it?

PM'd you</TD></TR></TABLE>

lol, not that i know of. pm'd ya back!

 

bump
--waiting for tracking #--

 

Do you still have the valve guides? Let me know. Thanks.