BC4 cams / RM valvetrain / Pistons / RC injectors / and stuff ***Cheap***
Thread Starter
Junior Member
Joined: Apr 2005
Posts: 133
Likes: 0
From: NorCal916, CA, US
BC4 cams / RM valvetrain / Pistons / RC injectors / and stuff ***Cheap***
Everything needs to go....prices are somewhat firm, because they are pretty low.
****Bump this up if you look****
Rocket Motorsports Gen 2 valvesprings & retainers (was used with the BC4 cams)-*SOLD to local*
Buddy Club Spec 4 cams (used for less than 25 dyno pulls)-*SOLD to -bambam-*
RC 310 saturated injectors w/ clips-*SOLD to local*
JE pistons 84mm 11.5:1 compression w/ rings,wristpins,locks (new)-*SOLD to -b20bvtec'd-*
Gsr crankshaft already micropolished -*SOLD to some dude*
CTR 81mm pistons on gsr rods w/ new rings (new) $225
AEM 3 bolt cam gears (i'll even throw in new cam seals) $95
"Custom" B series vtec valvecover w/ both top and bottom timing belt covers (already cut for cam gears) $110
Located in sunny Sacramento for pickups....i can ship also. thanks.
****Bump this up if you look****
Modified by lsv_gsr at 10:16 PM 6/25/2006
Modified by lsv_gsr at 8:46 PM 7/5/2006
Modified by lsv_gsr at 8:47 PM 7/5/2006
Modified by lsv_gsr at 11:41 AM 7/10/2006
Modified by lsv_gsr at 7:17 PM 7/13/2006
Modified by lsv_gsr at 3:41 PM 7/31/2006
Modified by lsv_gsr at 9:36 PM 8/2/2006
****Bump this up if you look****
Rocket Motorsports Gen 2 valvesprings & retainers (was used with the BC4 cams)-*SOLD to local*
Buddy Club Spec 4 cams (used for less than 25 dyno pulls)-*SOLD to -bambam-*
RC 310 saturated injectors w/ clips-*SOLD to local*
JE pistons 84mm 11.5:1 compression w/ rings,wristpins,locks (new)-*SOLD to -b20bvtec'd-*
Gsr crankshaft already micropolished -*SOLD to some dude*
CTR 81mm pistons on gsr rods w/ new rings (new) $225
AEM 3 bolt cam gears (i'll even throw in new cam seals) $95
"Custom" B series vtec valvecover w/ both top and bottom timing belt covers (already cut for cam gears) $110
Located in sunny Sacramento for pickups....i can ship also. thanks.
****Bump this up if you look****
Modified by lsv_gsr at 10:16 PM 6/25/2006
Modified by lsv_gsr at 8:46 PM 7/5/2006
Modified by lsv_gsr at 8:47 PM 7/5/2006
Modified by lsv_gsr at 11:41 AM 7/10/2006
Modified by lsv_gsr at 7:17 PM 7/13/2006
Modified by lsv_gsr at 3:41 PM 7/31/2006
Modified by lsv_gsr at 9:36 PM 8/2/2006
Trending Topics
Thread Starter
Junior Member
Joined: Apr 2005
Posts: 133
Likes: 0
From: NorCal916, CA, US
Re: BC4 cams / RM valvetrain / Pistons / RC injectors / and stuff ***Cheap*** (buckNasty)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ADVAN EG2 »</TD></TR><TR><TD CLASS="quote">willing to trade the RM valvetrain for a B16 shortblock? </TD></TR></TABLE>
Don't really have any use for a B16 block right now.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by buckNasty »</TD></TR><TR><TD CLASS="quote">pm me how much to ship valvetrain to 95023</TD></TR></TABLE>
Might be pending....but shipping should be no more than $15, at the most, with tracking number and everything.
Don't really have any use for a B16 block right now.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by buckNasty »</TD></TR><TR><TD CLASS="quote">pm me how much to ship valvetrain to 95023</TD></TR></TABLE>
Might be pending....but shipping should be no more than $15, at the most, with tracking number and everything.
Thread Starter
Junior Member
Joined: Apr 2005
Posts: 133
Likes: 0
From: NorCal916, CA, US
Re: (kingkong)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kingkong »</TD></TR><TR><TD CLASS="quote">GOOD ISH.</TD></TR></TABLE>
thanks bro...bump.....
thanks bro...bump.....
Thread Starter
Junior Member
Joined: Apr 2005
Posts: 133
Likes: 0
From: NorCal916, CA, US
Re: (OUT OF ORDER)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OUT OF ORDER »</TD></TR><TR><TD CLASS="quote">ttt with good prices!</TD></TR></TABLE>
replied you back -OUT OF ORDER-.....bump.
replied you back -OUT OF ORDER-.....bump.
Honda-Tech Member
Joined: May 2003
Posts: 3,195
Likes: 17
From: Norwich, CT, USA
Re: (lsv_gsr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lsv_gsr »</TD></TR><TR><TD CLASS="quote">back to the top.... 
</TD></TR></TABLE>
cams sold to me.
</TD></TR></TABLE>cams sold to me.
Thread Starter
Junior Member
Joined: Apr 2005
Posts: 133
Likes: 0
From: NorCal916, CA, US
Re: (bambam)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bambam »</TD></TR><TR><TD CLASS="quote">
cams sold to me.</TD></TR></TABLE>
Thanks Jordan, i'll ship them out tomorrow.
cams sold to me.
</TD></TR></TABLE>Thanks Jordan, i'll ship them out tomorrow.
Thread Starter
Junior Member
Joined: Apr 2005
Posts: 133
Likes: 0
From: NorCal916, CA, US
Re: BC4 cams / RM valvetrain / Pistons / RC injectors / and stuff ***Cheap*** (bambam)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bambam »</TD></TR><TR><TD CLASS="quote">bump for tracking.</TD></TR></TABLE>
bump for just sent you tracking number....
bump for just sent you tracking number....
Honda-Tech Member
Joined: May 2003
Posts: 3,195
Likes: 17
From: Norwich, CT, USA
Re: BC4 cams / RM valvetrain / Pistons / RC injectors / and stuff ***Cheap*** (lsv_gsr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lsv_gsr »</TD></TR><TR><TD CLASS="quote">bump for just sent you tracking number.... </TD></TR></TABLE>
bump for recieving the tracking number
</TD></TR></TABLE>bump for recieving the tracking number
Thread Starter
Junior Member
Joined: Apr 2005
Posts: 133
Likes: 0
From: NorCal916, CA, US
Re: BC4 cams / RM valvetrain / Pistons / RC injectors / and stuff ***Cheap*** (bambam)
bump for JE pistons being sold....
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bambam »</TD></TR><TR><TD CLASS="quote">
bump for recieving the tracking number </TD></TR></TABLE>
Let me know how those cams perform for you...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bambam »</TD></TR><TR><TD CLASS="quote">
bump for recieving the tracking number
</TD></TR></TABLE>Let me know how those cams perform for you...
Honda-Tech Member
Joined: May 2003
Posts: 3,195
Likes: 17
From: Norwich, CT, USA
Re: BC4 cams / RM valvetrain / Pistons / RC injectors / and stuff ***Cheap*** (lsv_gsr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lsv_gsr »</TD></TR><TR><TD CLASS="quote">bump for JE pistons being sold....
Let me know how those cams perform for you... </TD></TR></TABLE>
i'll be installing them this saturday with my profab 4-2-1 and new 2.5 kteller exhaust. After i tune, i'm hoping for at least a 30 whp gain. I don't forsee that being a problem. I'm hoping to break 225 whp, that's my goal anyway.
Let me know how those cams perform for you...
</TD></TR></TABLE>i'll be installing them this saturday with my profab 4-2-1 and new 2.5 kteller exhaust. After i tune, i'm hoping for at least a 30 whp gain. I don't forsee that being a problem. I'm hoping to break 225 whp, that's my goal anyway.