LS-Vtec- Brand New-Zero Miles- Built!!!
Ok guys heres what Ive got:
LS-Vtec
B18B1 Block
B16 Head
Endyn 81.5mm Rollerwave Pistons
Eagle LS Rods
Stage 1 Port and Polish
Balanced and Blueprinted
Type R:
Oil Pump
Water Pump
Valves
LMAs
Crower Titanium Retainers
Crower Valve Springs
Hondata Tuned For 310cc inj and Skunk2 Cams
GSR Cams in it as of now
Hondata Coversion Harness
Oversized LS-Vtec Oil Line
Also the engine has been fitted with misc. brand new OEM hardware throughout.
The Valve cover is stripped as of right now due to the fact I will have it powdercoated what ever color the buyer would like. I will also have the valve cover polished for an extra fee.
I have all reciepts which total over $4000.00. This engine has never been ran. It was built with intentions of going into my newly aquired crx however I decided that I would save some money and put it into my other CRXs. (No need for 3 Built CRXs)
All work was done by Payne Technologies if youd like to check them out.
I can be contacted by pm or email. OneFstCrx@hotmail.com
Shoot me an email or pm and I will give you my phone number so I can speak with you directly.
With the GSR cams it should be somewhere around 200- With a set of Skunk2 and 310cc(Should be over 200 No problem.)
I have pictures just not exactly sure how to post the. If somone could give me a hand that would be great.
Thanks,
Justin
LS-Vtec
B18B1 Block
B16 Head
Endyn 81.5mm Rollerwave Pistons
Eagle LS Rods
Stage 1 Port and Polish
Balanced and Blueprinted
Type R:
Oil Pump
Water Pump
Valves
LMAs
Crower Titanium Retainers
Crower Valve Springs
Hondata Tuned For 310cc inj and Skunk2 Cams
GSR Cams in it as of now
Hondata Coversion Harness
Oversized LS-Vtec Oil Line
Also the engine has been fitted with misc. brand new OEM hardware throughout.
The Valve cover is stripped as of right now due to the fact I will have it powdercoated what ever color the buyer would like. I will also have the valve cover polished for an extra fee.
I have all reciepts which total over $4000.00. This engine has never been ran. It was built with intentions of going into my newly aquired crx however I decided that I would save some money and put it into my other CRXs. (No need for 3 Built CRXs)
All work was done by Payne Technologies if youd like to check them out.
I can be contacted by pm or email. OneFstCrx@hotmail.com
Shoot me an email or pm and I will give you my phone number so I can speak with you directly.
With the GSR cams it should be somewhere around 200- With a set of Skunk2 and 310cc(Should be over 200 No problem.)
I have pictures just not exactly sure how to post the. If somone could give me a hand that would be great.
Thanks,
Justin
Thread
Thread Starter
Forum
Replies
Last Post
negroeg6
Northern California (Sales)
24
May 18, 2011 03:49 PM
Spec...G@rage
For Sale
3
Jul 10, 2006 08:31 AM



