Can anyone point me to a good installation instruction site for this bad boy? The instructions arent all that bad, but I'd like something else for cross examination.
b18c1 obd1.

 

*bump*

 

http://www.apexi-usa.com

 

doh, thats the last place i thought about looking

 

Duh!

They've got a great pinout reference there that I used for my AVC-R, it's good stuff

 

so do i run the solenoid valve's "COM" side to the acuator (internal wastegate) and then the "NO" side to the vaccume line?
and then does the pressure sensor splice into any vaccume line?

 

Pressure sensor runs off of any manifold vacum source, as for which port is which, I'd have to go look at my car or something cause I really can't recall off the top of my head. Although the instructions show it pretty clearly.

 

well basically the solinoid valve splices into the vaccume line that connects between the wategate and the vaccume source, right?

 

no? yes? i dun wanna screw anything up here.

 

Yes, the soleniod is hooked up between the wategate/actuator and the vacum source for the wastegate/actuator, just make sure you have the inlet/outlet hooked up properly.

 

thanks!