posting for a friend.

will sell as whole or part out.
selling whole for $4500. w/o slipstreams, bfgs, cf hatch, cf spoiler...

**ALL PARTS WITH 50miles ON THEM!!**

94 Hatch WHite 5spd $1000
Vis cf hood $400
97 GSR tranny $500
Tokico blues all around w/ ground control coilovers $400
Turbonetics t3/4 57trim Full turbo kit $2500
fluidyne?? aluminum radiator $100
Skunk2 pro series IM $200
Vis CF hatch **new** $350
Vis?? Duckbill wing **new** $150
97 GSR HEAD (stock) $500
97 GSR BLOCK built/benson sleeved $1000 (see below)
::BLOCK::::
Benson Sleeved 1.8
Je 9:1
eagle rods
new bearings and gaskets
polished crank
GM 3bar MAP sensor
**new** rota slipsteams with nankang on the rears and new bfgs on front 15" $500
all interior new with black carpeting goes with the hatch $1000
no rear seats
black doors, dash
automoter 2 5/8 gauges boost, oil, 5" tenzo tach. all in the dash pod thingy
tenzor black seats with sliders and rails
walbro 255 goes with hatch
RC engineering 750's $250
hondata S300 tuned $500
TRICK ENGINEERING


the bad
on the dyno after a couple pulls. made 302whp at 10psi. another run on the dyno the kid never replaced the fuel filter (car had orign 200k) the filter was clogged. car leaned out and melted a piston. needs to have the sleeves bored and re honed and new pistons. everything else should be mint. over $16,000 in receipts all with less than 50miles on EVERYTHING but the chassis. well worth it if u know someone at a machine shop


Modified by CivicB18C1 at 6:17 PM 6/8/2006

 

bump

 

pictures?

 

bump for benson !

 

thanks