moroso oil pan and z10 traction bar don't mix :(
Thread Starter
Honda-Tech Member
Joined: Feb 2003
Posts: 1,740
Likes: 1
From: Phoenix Arizona
moroso oil pan and z10 traction bar don't mix :(
About 4 years ago I bought a Moroso sheet metal oil pan. Later I got some z-10 traction bars. The clearance was about 1/8", which I was definitely not comfortable with, and eventually the left bar rubbed a nice mark on the oil pan.. 
It's been bugging me for years. Now that the engine is out, I have the opportunity to correct this little flaw before it becomes a major problem :wink:
Step 1: use layout dye to mark the area
Step 2: scribe cut lines
Step 3: cut hole
Step 4: cut a patch
Step 5: buy welder a 12-pack of his favorite beer and have him weld it
It's been bugging me for years. Now that the engine is out, I have the opportunity to correct this little flaw before it becomes a major problem :wink:
Step 1: use layout dye to mark the area
Step 2: scribe cut lines
Step 3: cut hole
Step 4: cut a patch
Step 5: buy welder a 12-pack of his favorite beer and have him weld it
Thread Starter
Honda-Tech Member
Joined: Feb 2003
Posts: 1,740
Likes: 1
From: Phoenix Arizona
Re: moroso oil pan and z10 traction bar don't mix :( (wantboost)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wantboost »</TD></TR><TR><TD CLASS="quote">looks good. isnt dychem a pita to get off? lol</TD></TR></TABLE>
lol..nope, just a bit of methanol, and voila...all gone..
lol..nope, just a bit of methanol, and voila...all gone..
Thread
Thread Starter
Forum
Replies
Last Post
FOMULA91
Honda CRX / EF Civic (1988 - 1991)
1
Feb 21, 2015 03:39 PM
X-Mazda 3 Racer
Road Racing / Autocross & Time Attack
45
May 1, 2005 08:06 PM
