another CRX project!
88 CRX HF $500 RUNNING
THE GOOD:
1.6 CRX SI MOTOR 5SPEED
CRX SI GAUGE CLUSTER
CRX SI BRAKE SYSTEM FRONT AND BACK
THE BAD:
200LBS OF BONDO ON THE MOLDINGS
NO PAINT WAS PRIMERED BLACK
HOOD IS BENT (IDIOT PROBABLY FORGET TO CLOSE THE HOOD LOL)
CRACKED WINDSHIELD
CAME WITH ONLY DRIVER SEAT
CRACKED HEADLIGHTS
WORK DONE SO FAR:
CHISELED OFF AND SANDED 200LB OF BONDO ON DOORS AND FENDER AND QUARTER PANEL (I HATE IT WHEN PPL FLUSH THEIR MOLDINGS I MEAN AT LEAST DO IT RIGHT THE PERSON THAT DID THIS CRX DIDNT WELD OR EVEN SANDED IT DOWN TO THE METAL IT WAS JUST BOLDO ON TOP OF PAINT AND IT WAS ALL CRACKED UP WASTE MY TIME BEEYATCH!),
SANDED DOWN BLACK PRIMER PRIMERED IT WHITE (I DID A CRAPPY JOB BUT ILL MAKE IT UP),
CLEANED INTERIOR,
PULLED OUT OLD MOTOR
BTW FS: 88-91 CRX SI MOTOR COMPLETE TRANS, ECU, HARNESS (MAKE OFFER NOT SURE OF YEAR OR MILEAGE)
REMOVED REAR BUMPER AND TAILLIGHTS.
WORK THAT IS GOING TO BE DONE:
REMOVE INTERIOR,
PAINT IT FROST WHITE INSIDE AND OUT INCLUDING ENGINE BAY (IM DOING IT MYSELF ^_^ ),
NO JDM PARTS MAYBE ONLY ENGINE POSSIBLY JDM B16A OR A SOHC VTEC MINI-ME, OR TRUBO ALL USDM BABY!!
91 TAILLIGHTS,
91 SI SEATS,
AMBER CORNER LIGHTS,
BASICALLY I JUST WANT A CLEAN FAST CRX THATS NOT JDM HYPE, JDM IS OVERRATED (SORRY JDM FREAKS HEHE).





Modified by rhdjdmda6 at 12:21 AM 6/6/2006
THE GOOD:
1.6 CRX SI MOTOR 5SPEED
CRX SI GAUGE CLUSTER
CRX SI BRAKE SYSTEM FRONT AND BACK
THE BAD:
200LBS OF BONDO ON THE MOLDINGS
NO PAINT WAS PRIMERED BLACK
HOOD IS BENT (IDIOT PROBABLY FORGET TO CLOSE THE HOOD LOL)
CRACKED WINDSHIELD
CAME WITH ONLY DRIVER SEAT
CRACKED HEADLIGHTS
WORK DONE SO FAR:
CHISELED OFF AND SANDED 200LB OF BONDO ON DOORS AND FENDER AND QUARTER PANEL (I HATE IT WHEN PPL FLUSH THEIR MOLDINGS I MEAN AT LEAST DO IT RIGHT THE PERSON THAT DID THIS CRX DIDNT WELD OR EVEN SANDED IT DOWN TO THE METAL IT WAS JUST BOLDO ON TOP OF PAINT AND IT WAS ALL CRACKED UP WASTE MY TIME BEEYATCH!),
SANDED DOWN BLACK PRIMER PRIMERED IT WHITE (I DID A CRAPPY JOB BUT ILL MAKE IT UP),
CLEANED INTERIOR,
PULLED OUT OLD MOTOR
BTW FS: 88-91 CRX SI MOTOR COMPLETE TRANS, ECU, HARNESS (MAKE OFFER NOT SURE OF YEAR OR MILEAGE)
REMOVED REAR BUMPER AND TAILLIGHTS.
WORK THAT IS GOING TO BE DONE:
REMOVE INTERIOR,
PAINT IT FROST WHITE INSIDE AND OUT INCLUDING ENGINE BAY (IM DOING IT MYSELF ^_^ ),
NO JDM PARTS MAYBE ONLY ENGINE POSSIBLY JDM B16A OR A SOHC VTEC MINI-ME, OR TRUBO ALL USDM BABY!!
91 TAILLIGHTS,
91 SI SEATS,
AMBER CORNER LIGHTS,
BASICALLY I JUST WANT A CLEAN FAST CRX THATS NOT JDM HYPE, JDM IS OVERRATED (SORRY JDM FREAKS HEHE).





Modified by rhdjdmda6 at 12:21 AM 6/6/2006
Rock on good luck with it
keep us hooked up with pic updates and all that goodness
Edit: Whoa whats with the Jdm hating...
better watch it the JDM l33t crew on here will get ya and once they do they'll brainwash you until you start to like JDM stuff and have you buying type r shift boots and all that cool stuff like that
sleep tight
keep us hooked up with pic updates and all that goodness
Edit: Whoa whats with the Jdm hating...
better watch it the JDM l33t crew on here will get ya and once they do they'll brainwash you until you start to like JDM stuff and have you buying type r shift boots and all that cool stuff like that
sleep tight
Trending Topics
gee thx everyone for the flamage
this is restoration project its my first one give me a break hehe. as for the sprayed over trim...dont worry i'll paint them black again
. and PMs answered
Modified by rhdjdmda6 at 7:43 AM 6/6/2006
this is restoration project its my first one give me a break hehe. as for the sprayed over trim...dont worry i'll paint them black again
. and PMs answeredModified by rhdjdmda6 at 7:43 AM 6/6/2006
pick up only.
5. Anyone selling a Large ticket Item such as Seats, Full Interiors, Engines, Body Parts, and the like are Required to Email the moderators with the VIN # from the car that the part came from, In the case of an Engine a Picture of Both the Vin Plate and Serial# with Block code must be taken. (PLEASE NOTE - Include a link to your Post so that WE can put the 2 together.)
6. There is no such thing as "pick-up only" on Honda-Tech. If you can post an ad, you can pack it and ship it. This policy is in place so that EVERYONE can take advantage of people selling things, no matter what area you live in. International shipping is up to the discretion of the seller. If you don't like this policy, don't post here. It's free to do so, so please abide by these rules.
Failure to conform to the above rules will result in your Post either being Deleted or Locked. You may also lose % points, amount will be left to the Moderators judgement.
These Rules are in effect to protect the members of this board.
Thank You.
Classified Moderators
5. Anyone selling a Large ticket Item such as Seats, Full Interiors, Engines, Body Parts, and the like are Required to Email the moderators with the VIN # from the car that the part came from, In the case of an Engine a Picture of Both the Vin Plate and Serial# with Block code must be taken. (PLEASE NOTE - Include a link to your Post so that WE can put the 2 together.)
6. There is no such thing as "pick-up only" on Honda-Tech. If you can post an ad, you can pack it and ship it. This policy is in place so that EVERYONE can take advantage of people selling things, no matter what area you live in. International shipping is up to the discretion of the seller. If you don't like this policy, don't post here. It's free to do so, so please abide by these rules.
Failure to conform to the above rules will result in your Post either being Deleted or Locked. You may also lose % points, amount will be left to the Moderators judgement.
These Rules are in effect to protect the members of this board.
Thank You.
Classified Moderators
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ »</TD></TR><TR><TD CLASS="quote">pick up only.
6. There is no such thing as "pick-up only" on Honda-Tech. </TD></TR></TABLE>
That rule does not apply to the Regional Classifieds (go to http://www.hondamarketplace.com and pick your region) and to Vehicles For Sale.
It's no longer strictly true that there is no such thing as pick-up-only.
Enforcing that old rule across the boards would simply result in fewer ads being placed.
If you try to force somebody to ship you a car who doesn't want to ship you a car, you're obviously asking for serious trouble. You're going to have to pick the shipper yourself, and pay the shipper yourself, and you won't be assured of good cooperation at the remote end.
I'm not sure why everything has to be such a big deal.
Regarding the VIN: Yes, a seller does have to supply a VIN for major items like engines and transmissions.
6. There is no such thing as "pick-up only" on Honda-Tech. </TD></TR></TABLE>
That rule does not apply to the Regional Classifieds (go to http://www.hondamarketplace.com and pick your region) and to Vehicles For Sale.
It's no longer strictly true that there is no such thing as pick-up-only.
Enforcing that old rule across the boards would simply result in fewer ads being placed.
If you try to force somebody to ship you a car who doesn't want to ship you a car, you're obviously asking for serious trouble. You're going to have to pick the shipper yourself, and pay the shipper yourself, and you won't be assured of good cooperation at the remote end.
I'm not sure why everything has to be such a big deal.

Regarding the VIN: Yes, a seller does have to supply a VIN for major items like engines and transmissions.
Thread
Thread Starter
Forum
Replies
Last Post










