Due to popular request, each month a new thread will be stickied for parts. The old threads will simply be locked and can be found with a search.

Also, please PM each other if you are interested in a particular item.

 

FS:
Spoon LSD very good condition off the spoon race car. Haven't touched it since, still sitting in the box. Would like to get 600.00 for it. New retails for 1160. Wai can vouch for its condition. Would accept paypal but m.o is preferred need the funds for expo!!!

 

WTB:
type r tranny, usdm or jdm 98+
type r muffler.

f/s possibly:
oem itr lip (just testing waters .....)

 

WTB: 3" CAI. Does not have to have filter or couplings since I have those already. Brand doesn't matter. I'll settle with a generic one since it's cheaper, but if you have an AEM for cheap, that would be nice.

 

This is pretty much the extent of my list. Included are the part numbers for reference. I'm not interested in getting high balled. I have paypal standing by. Thanks for taking a look.

1) Driver Side A-Pillar Plastic Piece

84151-ST7-000ZA

2) Driver Side & Passenger Side C Pillar/Rear Window Plastic Piece Purchased from Akhom

84180-ST7-A00ZA
84130-ST7-A00ZA

3) Driver Side Rear Strut Tower Cover

83785-ST7-000ZA

4) Rear Seat Strikes (x2) with Mounting Bolts (x4) Purchased From: B18EG6
The strikes stick out of this little slot located in the rear plastic behind the rear speakers.

78185-SB3-003

5) Seat Belt Bolt Covers (x4)
The little triangle plastic pieces that cover the assembly pointed at in the illustration

81493-SR3-004ZB

6) Integra Type-R Black Leather with Red Stitching Shift ****

54102-S30-N20

7) Integra Type-R Door Panels

83533-ST7-A30ZA
83583-ST7-A30ZA

8) Integra Type-R Front and Rear Emblems

75700-ST7-R00
75701-ST7-R00

9) 1997 Integra Type-R Front Bumper, Lip and Fender Braces w/ Hardware.
Arrows indicate the placement of the Fender Braces and HardwareFENDER BRACES Purchased from Akhom

04711-ST7-A90ZZ
71110-ST7-R00ZZ
71144-ST7-000
71143-ST7-000
71194-ST7-000
71193-ST7-000
90661-SJ8-000 (x2)
90130-SR2-003
90661-ST7-003
93903-15380

10) Windshield Rubber Gasket (Driver Side)
Picture for reference. Arrow pointing at part needed. No part number.


11) Windshield Bezel Mounting Inserts and Water Squirter

91515-SR3-000
74142-ST7-000
76810-ST7-901

12) OEM 1996-1997 Fuel Pump GS-R/Type-R
17040-ST7-A33

13) OEM Pedal Covers

46545-SH3-000
17816-SK7-000

14) Passenger Side "Oh ****!" Handle

78130-SE7-G02ZL

15) Integra Type-R Center Console W/ Armrest
Looking for all the pieces that fit into this area in the picture

83412-SK7-000ZA
83406-ST7-003ZA
83401-ST0-003ZC

16) Dash Coin Holder

77755-ST7-A01ZA

17) Steering Wheel Plastic Covers

78513-SR4-A82ZB
78514-SR4-A81ZA
78520-SR3-A01ZA

18) Integra Type-R Rear Wing (Championship White)

71700-ST7-Z00ZA

19) Carpet Mounting Inserts. Attatch interior carpet to the big black lower C-brace just under the rear seat.

91562-ST8-003

20) Integra Type-R Trunk Carpet. Attaches to the back side of rear seats. Purchased From: B18EG6
Picture: Robs
82320-ST7-A21ZA
90667-SA7-003YW

21) Integra Type-R Spare Tire and Mounting Bracket

42700-SX0-A01
42767-SV4-A00
83850-SH3-000
83853-SA7-980

22) Integra Type-R Mud Flaps (x4)
No Picture
08P00-ST7-203

23) Integra Type-R Rear Lower Tie Rod Bar

74350-ST7-R00

24) Integra Type-R Front Strut Tower Brace w/ Nuts
No Picture
74300-ST7-Z00
94050-08070

25) A/C Bolts
No Picture
95701-06025-08

26) Integra Type-R Transmission/Engine Mount
No Picture
No Part Number

27) Interior Illumination Lighting ****. Located to the right side of the steering wheel on the dash.Purchased from Akhom
No Picture
35150-ST7-A01

28) Integra Type-R Rear Dash/Shelf

84400-ST7-000ZA

29) OEM Car Jack & ToolsPurchased from Akhom

89000-SH3-A02
89310-S30-003

Thanks for looking!

Selling this Authentic SPOON rear lower tie rod bar. Fits DC2 and EG chasis codes. Might even fit a DB8. First $50.00 can have it. I'm not paying your shipping though

Paypal, add 3%

Thanks for looking.



SALE PENDING TO NEMISIS0104To blingy for my tastes and I am no longer racing my car. For Sale/Trade is this Championship White/Flat Black Mugen Generation 2 Rep. Adjustable wing for the DC2 Integra. This WILL NOT fit on DB8 chasis or DA chasis.

I'm looking for $400.00 cash or the trade of an Authentic OEM DC2 ITR rear wing.

Paypal, add 3%

Thanks for looking.




Modified by Haleiwa-Brando at 12:17 PM 6/30/2006

 

I'm starting to get rid of alot of the extra stuff I have laying around. I can bring all parts to expo

FS: Full Length Koyo Radiator (used for 2 weeks) - Installed in my car

VIS Spoon Carbon Front Lip (On my car for 2 days) - SOLD

Personal Steering Wheel - Mostly leather with suede inner grip area - MINT - SOLD

Machined Hub Adapter - Makes use of Momo wheel with nardi/personal hub and vice versa - $55 shipped



HKS Mega Filter (3 inch inlet) - $45 shipped


HyperRev Integra Book - Newest Edition - $40 shipped


Lega Beat Shift **** - Small Style - $20 shipped!


SARD Carbon-Kevlar 3D Wing - 2 Locations for mounting legs (wide and narrow) - $Make Offer



Modified by tommymoose at 11:01 AM 6/3/2006


Modified by tommymoose at 12:49 PM 6/3/2006


Modified by tommymoose at 8:03 PM 6/14/2006

 

I have the following items for sale:

1998 ITR ECU - $Make Offer
USDM ITR Rear Seats - $Make Offer
USDM ITR CW Wheels - $Make Offer
USDM ITR Rear Section Exhaust - $Make Offer

All items are located in South Carolina.

 

e-mail sent

 

WTB: stock low mile ITR shocks and springs..

 

pm'ed Haleiwa-Brando about the wheel, hub and quick release

 

Mint Condition Championship White JDM ITR wing
$200


selling my "16 Mugen RG's in 5x114.3 +50 offset
They come wrapped with Hankook Ventus RS-2's the tire specs are 215x45-16 with about 90% tread left
Only asking $650
Not Actual Pic, borrowed as a reference of what they look like



Complete B-series Shift Linkage off of a 99-00 SI. Practically brand new. Will work for B-series swaps in 92-00 Civics, 94-01 Integras etc.
$100

High flow Cat with 2.5 in collecter for ITR or aftermarket header. Has spot for secondary 02 needed to pass smog. Less than 20k. Will work on most civics and integras
$100

 

WTB: 96 Spec JDM ITR header.

I am looking for a 96spec JDM ITR header. The 4-2-1 cast iron piece with the 2.5" collector. Please PM me Thanks!

 

FS: OEM ITR exhaust. Complete from the header back, and including the secondary o2.

OEM A/C compressor

Rear plastics

Misc. other AC parts

Antenna complete with everything needed.

That's all I can think of right now. If you need anything else, just shoot me a PM and I'll see if I have it.

 

WTB: ITR Throttlebody (not the manifold) OE or aftermarket

 

wtb factory integra type r service manual or helms.
paypal ready!
PM me if u got it!

 

FS mugen gen 2 replica wing 200.00

 

WTB oem usdm itr red badges, also want type R rear trunk matt, would be nice it they were mint. please pm me, thanks

 

actual picture of items

A OEM Integra Type R Intake Manifold. This Manifold was sent to Comptech Machine for their complete re-work service which includes complete porting of the runners, de-burr of the plenum, and match porting to O.S. throttle body. This Manifold helped me yield 227whp/144 ft/lbs TQ on my stock block ITR

Asking $300 firm

JDM Integra Type R throttle body. This throttle body was sent over to George at http://www.MaxBore.com for his big bore service. The Throttle body now bored to a massive 65mm and tapers out to 70mm. Heres a little more information on the actual service
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Maxbore &raquo;</TD></TR><TR><TD CLASS="quote">Now some information about what it is I do. First, the throttle bodies are disassembled, that includes all the sensors and all moving parts. Then the throttle body is sand blasted with ultra fine sand. It is then cleaned and all sand is removed. The throttle body then goes to the lathe, where it is bored, then ported and finally polished. the opening of the throttle body gets a taper that begins at 6 degrees then 3 degrees. A new bigger butterfly is made out of brass. It is then carefully fitted to the throttle body. Once the proper seal is achieved the throttle body is reassembled. The throttle position sensor (TPS) is reinstalled using new screws and it is set to factory specs. </TD></TR></TABLE>
$200 firm

If someone wants to buy both the throttle body and Manifold for asking price Ill ship for free

Last I have a mint condition ITR Comptech Intake/airbox combo. Used for about 3k miles. Intake itself retails for $200 and the Airbox retails for $170 http://www.comptechusa.com/store/intake8.html
asking $200 firm

 

Ebay Links to my stuff...
Boomslang Harness
http://cgi.ebay.com/ebaymotors...h=013
OBD2B to OBD2A Conversion Harness
http://cgi.ebay.com/ebaymotors...h=013
Valve Cover
http://cgi.ebay.com/ebaymotors...h=013

I'm also letting this go for cheap. It's a K20 intake manifold cover..Make reasonable offer...





Modified by nemesis0104 at 5:56 PM 7/1/2006

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nemesis0104 &raquo;</TD></TR><TR><TD CLASS="quote">Still have my Apex'i Power FC w/ Commander and Conversion Harness for sale...560 Shipped....

ITR Shifter console.. 9-10 condition (will post pics later).. 60 OBO

</TD></TR></TABLE>

PM'ed

 

WTB: GSR or ITR rear trailing arms.

tried to swap eg rear suspension to a ITR but found out that it EG isnt the same size as the ITR.
also willing to throw in the EG rears (drums) plus cash, if possible.

also.. have for sale
stock ITR oil pan, stock intake w/o arm.

 

WTB: stock itr crank pulley (No A/C)

 

WTB:

type R center armrest
type R shiftboot w/ red stitching
type R CF Ashtray [Found one]
GS-R moonroof switch Found one

FS:
Oldschool Mugen brochures, not iTR related though.
http://www.hondamarketplace.co...60697
Modified by Bart-EK at 10:16 AM 6/13/2006


Modified by Bart-EK at 10:31 AM 6/15/2006

 

WTB

Rear OEM "Acura" emblem, left hand side.


Modified by 43! at 11:41 AM 6/5/2006

 

wtb: stock itr springs

or springs,struts, and lca's

thanks