I think I need a new Engine+tranny........ PLEASE HELP GUYS

Thread Tools
 
Search this Thread
 
Old Apr 14, 2002 | 08:22 PM
  #1  
CRXBoy's Avatar
Thread Starter
 
Joined: Mar 2002
Posts: 70
Likes: 0
From: Kelowna, B.C., Canada
Default I think I need a new Engine+tranny........ PLEASE HELP GUYS

Hey guys i need some help/advice. Well i was driving today and my car just stopped cause the tranny siezed solid. Well I threw in the clutch and coasted to my house. Now I have a hole about 8" tall by about 6" wide in the tranny case exposing the gears inside. You guys gotta see the pics when I get it out..


So now I need a new engine(cause mine was burning oil) and obviously a new tranny. What swaps are cheap to do I mean CHEAP cause I need the car back on the road.


It is a 89 CRX DX with a d16b2 and I was thinking of doing a b16 but they are way out of my price range.


What would you guys recommend on cheap engine swap with full upgradability.

ZC
LS
SOHC VTEC

??????

WHERE CAN YOU GET SUCH ENGINES CHEAP ????

I live in BC Canada so I dont want to pay 500 bucks shipping from florida and take 3 months then get held up at customs for a month charging me 300 bucks... you get the picture...


So where can I get this stuff?????
Reply
Old Apr 14, 2002 | 08:40 PM
  #2  
DR. ON POINT's Avatar
Banned
 
Joined: Jun 2001
Posts: 3,702
Likes: 0
From: NOVA, America
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (CRXBoy)

single cam vtec motor out of 92-95 civic, convert it to obd1 and use a p28
Reply
Old Apr 14, 2002 | 09:02 PM
  #3  
89 CRX SI's Avatar
 
Joined: Mar 2002
Posts: 1,883
Likes: 0
From: Kelowna, BC, CaNaDa
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (CRXBoy)

Here is what we found when we went back to my house.

I guess the tranny fluid drain bolt got ripped off over one of the bumps. Cause here is where the pudlle starts at my house.



Reply
Old Apr 14, 2002 | 09:30 PM
  #4  
speeddave's Avatar
Honda-Tech Member
 
Joined: Dec 2001
Posts: 2,003
Likes: 0
From: edmo, AB, Canada
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (89 CRX SI)

hey i have a 92 b18a for sale... its just a long block though, so you would need a trans+ usual b-series swap stuff, the engine is in exc. shape, very clean only 70,000kms...at least thats what the wrecker told me. i dunno what your budget is but if your interested email me at stevedave71@hotmail.com
Reply
Old Apr 14, 2002 | 10:09 PM
  #5  
SIRX's Avatar
Honda-Tech Member
 
Joined: Mar 2002
Posts: 2,245
Likes: 1
From: west Texas
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (CRXBoy)

I've got the d16a6 and tranny out of my SI. Kinda high miles but the head was redone and no smoke or oil burning. Just a thought.
Reply
Old Apr 14, 2002 | 10:19 PM
  #6  
Louie B.'s Avatar
 
Joined: Jan 2002
Posts: 2,276
Likes: 2
From: Phoenix, Arizona, United States
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (89 CRX SI)

all I see is black on the pics..... too dark?
Reply
Old Apr 15, 2002 | 06:34 AM
  #7  
89 CRX SI's Avatar
 
Joined: Mar 2002
Posts: 1,883
Likes: 0
From: Kelowna, BC, CaNaDa
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (thumpu77)

how much SIR for the d16a6???? That sounds good..
Reply
Old Apr 15, 2002 | 02:41 PM
  #8  
CRXBoy's Avatar
Thread Starter
 
Joined: Mar 2002
Posts: 70
Likes: 0
From: Kelowna, B.C., Canada
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (SIRX)

how much u want for the engine and tranny (SIRX)? e-mail me at hondman69@hotmail.com thanx


[Modified by CRXBoy, 11:42 PM 4/15/2002]
Reply
Old Apr 15, 2002 | 02:54 PM
  #9  
Hyper9's Avatar
 
Joined: Nov 2001
Posts: 165
Likes: 0
From: Fayetteville, NC, US
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (CRXBoy)

i have a sohc vtec head if you wanna do a minime
Reply
Old Apr 15, 2002 | 03:06 PM
  #10  
CRXBoy's Avatar
Thread Starter
 
Joined: Mar 2002
Posts: 70
Likes: 0
From: Kelowna, B.C., Canada
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (Hyper9)

how much for the head man and how hard would it be to do the swap
Reply
Old Apr 15, 2002 | 05:08 PM
  #11  
SIRX's Avatar
Honda-Tech Member
 
Joined: Mar 2002
Posts: 2,245
Likes: 1
From: west Texas
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (CRXBoy)

I guess I'm open to any reasonable offer. I would want to sell the whole setup and not part it out.
Reply
Old Apr 15, 2002 | 07:25 PM
  #12  
CRXBoy's Avatar
Thread Starter
 
Joined: Mar 2002
Posts: 70
Likes: 0
From: Kelowna, B.C., Canada
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (SIRX)

ok first off where r u located and why u selling it and do u know how hard it would be to do on a CRX DX engine? thax and i''ll get back to u on the price k
Reply
Old Apr 15, 2002 | 07:47 PM
  #13  
89 CRX SI's Avatar
 
Joined: Mar 2002
Posts: 1,883
Likes: 0
From: Kelowna, BC, CaNaDa
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (CRXBoy)

Well if you look under his name it says where he is located. If you look in his sig it says hes doing a hbrid swap so hes not going to need si engine etc......

I hope your not trying to get ritch off the d16a6 cause there not worth much eh. Ill give you a price tommorow I pay shipping.

Is it MPFI??? and how many KM's or io guess it would be MILES???

THX
Reply
Old Apr 15, 2002 | 08:17 PM
  #14  
SIRX's Avatar
Honda-Tech Member
 
Joined: Mar 2002
Posts: 2,245
Likes: 1
From: west Texas
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (89 CRX SI)

Well if you look under his name it says where he is located. If you look in his sig it says hes doing a hbrid swap so hes not going to need si engine etc......

I hope your not trying to get ritch off the d16a6 cause there not worth much eh. Ill give you a price tommorow I pay shipping.

Is it MPFI??? and how many KM's or io guess it would be MILES???

THX
right on for the reasons 180k miles new clutch,pressure plate,bearing approx. 600 miles, new timing belt approx 500 miles along with water pump@ the same time. Head was change approx 45,000 miles ago, The motor is still in the car and If it will set your mind at ease I'll send a vhs tape with start up,running and even a burnout (if desired) to interested parties. It runs great. It's my daily driver but I can have the car down for a few weeks (spring time camaro fun!!!) while I get the rest of the parts for my swap. I'm not trying to get rich but I don't want to give it away. I don't know what the combo sells for maybe a third party can give a good price for the both of us. I'll post pic's tomorrow if you want to see them?


[Modified by SIRX, 5:18 AM 4/16/2002]
Reply
Old Apr 15, 2002 | 08:23 PM
  #15  
89 CRX SI's Avatar
 
Joined: Mar 2002
Posts: 1,883
Likes: 0
From: Kelowna, BC, CaNaDa
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (SIRX)

A pic is all that is needed. So i guess the shipping will be about 200 cdn cause thats what it was for me. We can COD it. Yeah just take a few pics and we will go from there. Ill try and find out what they are worth. THX


and the person above with VTEC HEAD how much Ill buy that too and we will do a mini-me setup !! hehe
Reply
Old Apr 16, 2002 | 08:54 PM
  #16  
SIRX's Avatar
Honda-Tech Member
 
Joined: Mar 2002
Posts: 2,245
Likes: 1
From: west Texas
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (89 CRX SI)

sorry, I had to work late tonite and didn't get any pic's. I get them on tomorrow
Reply
Old Apr 16, 2002 | 08:56 PM
  #17  
89 CRX SI's Avatar
 
Joined: Mar 2002
Posts: 1,883
Likes: 0
From: Kelowna, BC, CaNaDa
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (SIRX)

No porblem we taking out the old blown one soon.. Friday it begins
Reply
Old Apr 16, 2002 | 09:39 PM
  #18  
CRXBoy's Avatar
Thread Starter
 
Joined: Mar 2002
Posts: 70
Likes: 0
From: Kelowna, B.C., Canada
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (89 CRX SI)

ha cant wait it's goin to be fun and i hope it will go smoothly to l8er guys and thanx for the help
Reply
Old Apr 17, 2002 | 05:40 PM
  #19  
SIRX's Avatar
Honda-Tech Member
 
Joined: Mar 2002
Posts: 2,245
Likes: 1
From: west Texas
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (89 CRX SI)

89crxsi you've got mail
Reply
Old Apr 17, 2002 | 06:58 PM
  #20  
89 CRX SI's Avatar
 
Joined: Mar 2002
Posts: 1,883
Likes: 0
From: Kelowna, BC, CaNaDa
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (SIRX)

Got it looks nice ill let you know
Reply
Old Apr 17, 2002 | 09:47 PM
  #21  
CRXBoy's Avatar
Thread Starter
 
Joined: Mar 2002
Posts: 70
Likes: 0
From: Kelowna, B.C., Canada
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (SIRX)

SIRX send me the pic too cuz well it's sorta for me so send it hondaman69@hotmail.com thanx
Reply
Old Apr 17, 2002 | 10:26 PM
  #22  
SIRX's Avatar
Honda-Tech Member
 
Joined: Mar 2002
Posts: 2,245
Likes: 1
From: west Texas
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (CRXBoy)

SIRX send me the pic too cuz well it's sorta for me so send it hondaman69@hotmail.com thanx
It's on it's way right now
Reply
Old Apr 18, 2002 | 06:54 AM
  #23  
89 CRX SI's Avatar
 
Joined: Mar 2002
Posts: 1,883
Likes: 0
From: Kelowna, BC, CaNaDa
Default Re: I think I need a new Engine+tranny........ PLEASE HELP GUYS (SIRX)

I sent the pics to CRXBoy cause i know your busy latley
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JDM'd
Honda Civic / Del Sol (1992 - 2000)
5
Mar 25, 2010 04:49 AM
99hatch
For Sale
10
Jan 10, 2005 05:23 PM
wadafa
Honda CRX / EF Civic (1988 - 1991)
7
Dec 27, 2002 10:18 AM
AzN_Flava
Acura Integra
2
May 7, 2002 12:26 AM




All times are GMT -8. The time now is 01:24 PM.