did some search but im still lost.. i have a b18c in a 92 si using the si harness.. ran Pink and blue wire from the iab to the ecu pin (a17).. what do i do with the black wire from iab.. I also read about switching a20 to a17?

 

you run that black wire to a switched 12volt source or the cluster of yellow and black wires on your driver side cannon plug

 

thanks ill try that.. oh yah i have an OBD1 gsr...


Modified by MooMoo24 at 12:50 PM 6/2/2006

 

i tried that it didnt work!!!!!!! need help haha

 

**bump*** damn jdm motors

 

there are only two wires from the manifold...and the black wire goes to a switched 12 volt source....