Best offer, some light weight miata wheels

4x100 35-45 offset
11lbs approx each

pm me

Also for sale some 195-70-14 tires, set of 4 dunlops
Wanted: 175 or 185-60-14s
and a 86-89 integra front lip

 

5/30/06... I cry FOUL until thursday

 

WTB: D16 block. Just need the block+crank. Cheaper the better.

FS/FT: USDM ITR Pistons - $175






Modified by paopao at 1:38 PM 5/30/2006

 

FS: Discountinued Mugen Rear DC2 Swaybar 26mm Very Rare $350
FS: VIS CF JDM DC2 Hood $350
FS: JDM OEM DC2 Front bumper $350
FS: 95 Integra LS Tranny no grinds $500
FS: Skunk2 Exhaust for DC2 $350
FS: 01 Integra Black Dash Board with pass airbag $80
FS: 00 Type R Shift Linkage with OEM Type R Shifter $50
FS: OBD1 GSR/B16 Vtec Distributor Brand New $200obo
FS: OBD1 GSR/B16 Vtec Engine Harness $150
FS: OBD1 LS B18 Engine Harness $120
FS: OBD1 GSR/B16 Vtec Alternator $70
FS: OBD1 P72 Vtec ECU 5SPD $150
FS: OBD1 p74 ECU 5SPD $100

FS: Wings West Integra Front Lip Urethane 98-01 $150



FS: Wings West Integra Rear Lip Urethane 98-01 $150



FS: ACT Heavy Duty 6-Puck Clutch/ resurfaced flywheel 8k on both $250




FS: Comptech headers for B-Series $350


FS: B18C5 Complete longblock $3,200 obo

Longblock has these items
Fresh new block from the dealer not a rebuilt one 8k miles since put together
Spoon Throttle Body
Crower Springs
Crower Retainers
Crower Valves
Toda Cam Gears
Toda Timing Belt
JDM ITR Pistons 11.1
Stock Rods and Crank
Port and Polish Stage 2
Intake Manifold was port matched







P.S. I bought a fresh block from the dealer (block code begins with a 0 instead of 1 so gaurantee legit) and piece everything together so i dont have the ITR trans with it. It rang up a bit more then buying a swap but all the aftermarket stuff i wanted 2 get.


Modified by AlienKrOZ at 9:55 PM 6/1/2006

 

Selling some more things now WITH NEW PRICES.....

All GSR parts are off a clean GSR motor with 70kish miles on it.

***Dizzy, with JDM ITR like new condition cap: 150obo

***GSR manifold: 70obo

***GSR TB: 65obo

***98 CIVIC EX automatic cluster with tach. same as the manual tack with the gear lights on it hahah. perfect for u EK guys with no tach. SOLD

***98 CIVIC EX calipers, never has my car seen a track of any sort. Would be great for a cx, dx, hatch back: 85obo

*********POSSIBLY SELLING A 96 JDM ITR ECU: make an offer



I live close to WOODFIELD MALL, ill meet up if u wanna see the stuff, my cam is not working right now

 

I'm looking to try something new. I've had this car for two years. It was purchased stock from a local car dealer. It is a very fun car to drive and has never left me stranded. What I've done since then is as follows:
Replaced D16Y8 with B18A
Specs on B18A
B18A block with USDM ITR Pistons installed with fresh hone approx. 8k. miles ago.
Approx. C/R = 10.6.1
GSR Transmission
*Had a bit of a warped head after install. Took car to King Motorsports (Mugen Distributor here in Wisconsin) where they installed a new headgasket and slightly milled the head to ensure good fitment, and a few misc. items. Cost @ $1007, have recipt. This shop ain't no joke.
Exedy Stage 1 Clutch
ITR Flywheel
Password JDM Carbon Fiber Intake
USDM ITR Header
Omnipower Test Pipe
RS*R Exmag Exhaust
Chipped ECU for HiComp pistons, stock redline
Toicko Blues with H/R Sport Springs
SI Wheels

Full Disclosure:
Cosmetically the paint is pretty good, nice lustre. There is a crack along the corner of the bumper from a parking lot bump. There is a dent in the hood about the size of a quarter.
Mechanically, the swap runs strong. Sometimes there is a bit of a surging idle, about 300-700. I was told this is a IAVC on the fritz. As far as the transmission goes, if you release the clutch when coasting, then come to a stop, you need to throw it into second quick before first. I don't understand this, but I've gotten used to it. Other than that the transmission never grinds, or pops out of gear. I use it because it's tough to find a decent B-series transmission with known condition.

What I'm looking for:
Show me some trades. I'd like to try something new, and this is an opportuinty for somebody else to do the same. My plan was to throw some Crower 403's or 404's and have a non-vtec all motor monster. Do some research, with this compression, you'll make gobs a power. So show me what you guys got.



Everybody loves pictures.

 

For Sale / For Trade
96 Civic OEM Airbox - Best Offer
16 x 7 Motegi Rims - Best Offer
EG Moonroof/Sunroof - Best Offer
Custom Intercooler Sprayer $40
GSR Intake Manifold $40
RJS 5pt Racing Harness $Best Offer
OEM 96 Civic Fuel Pump $20
OEM 96 Civic Stereo $15
OBD2 Integra Cat $25
2 13" Steelies with Goodyear Weather Handlers $40
ROTA Center Caps $15
16 inch Kaotik Spawn rims with Dunlop tires - Best Offer
Jackson Racing Boost Timing Controller $80
MOMO Leather shift *** $15
APC shift *** Black and Silver $15
OEM Cluster Bezel 96-00 civic $15
EX Springs 96-00 $25
OEM EG Hatch Spoiler with Brake Light Mint - Make Offer
EX After Market Rear Bumper Cover - Best Offer
RC - 10 remote control car with a ton of parts, batteries and chargers. I won plenty of trophies back in the day. Car, controller and toolbox full of equipment for RC cars. Best Offer and it is all yours.

To view pics of for sale items go to http://photos.yahoo.com/emilparz

WTB or Trade for
Drag Radials or Slicks
Struts for my 95 SI Koni's or something of that quality
Skunk 2 short throw shifter
C-Pillar bar for EG

Willing to make trades
Vouch Thread https://honda-tech.com/zerothread?id=1069202
Vouches: CTRb18c, Convoy, Knightman, Hybrid1992, JDM1civic, 88slowcrx, Dr. Beaver, Wickedplastikman, Silinteg90, lke2drvgsr, 89SiPimpin, integraXTC, m3bluegsr, JDM EJ1 95, dvela85, Accord9500ex, Lieu95accord, TypeRice, d16rice, JcDzM

 

WTB:
EF CRX Sunroof (black)
EF Body Pannels
EF Door
CRX EF 90-92 Tail lights
ITR or CTR Cams


Modified by chicagoboostin at 9:37 AM 5/31/2006


Modified by chicagoboostin at 1:43 PM 5/31/2006

 

fs:make offers

out of the 89 civic(climate control) have another also



integra stuff





other stuff like hatch shocksfrom an ef, work perfect( i also have another pair.) back ''civic'' panal i have one black and one red. red one has a scuff across the v, but other than that there just about perfect. a shift boot(no tears) pass. window peice . and those dash peices everyones after that keep breaking or are missing



anyone want this nice steering wheel?



also have out of two civics 89 and a 90(both dxs)
black dashes(with all vents and buttoms
2 clusters
one stock steering wheel
2 key sets all the way around
pass. tail lights and head lights
rear bumpers
front bumpers
outside trim
alot of ef/civic hatch stuff just ask

I WILL SHIP MAKE OFFERS

 

CRX HF parting out!

This is just some of the stuff, I will part the car some more this week end!!! So stay tuned more parts to come!!! subgeta@hotmail.com or AIM SSJSubgeta


D1 style fenders (Fiberglass/primered) $135

passenger side fender sprayed painted black $25

Front Bumper $50

HF Front Bumper Reenforcement $35

Rear Bumper $ 50

Rear Bumper Support (Includes Styrofoam Filler pieces) $65

Mirrors D/P side $25 each/$50 Both

Headlights (with bulbs & Frames)$45 each/$80 Both

Amber Corner lights $30 both

Stock corner lights $20 both

Tail lights (3 Pieces) $100


Engine/Aftermarket Parts:

D15b Vtec Motor(Roughly 35 to 45,XXX miles) $370

5-Speed Manual CRX SI Transmission (64,XXX miles) $150

91 CRX SI Spindels/Knuckle assembly $80 both

HF Engine Harness converted from OBD-0 to OBD-1,Conversion Harness Obd0-obd1,
Piggy back harness for Vtec plugs, Knock sensor, OBD1 Injector plugs,New Denso 4 Wire 02 sensor,Resesitor Box removed. $240

P28 ECU (virgin) $150

>>>>>>>>CRX Power package!!! all these 3 for $700<<<<<<<<
AEM Short ram intake $120
Megan racing stainless steel header 4-2-1 Header $160
Espelir JGT500 exhaust system (not a loud fart can, Actual JGT Exhaust) $500

NGK spark plug wires $45

NRG hood lock pins with keys $35

 

used BMC RACING LOG MANIFOLD $100

d-series head flange t3 turbo flange

used, it has a repair weld, that has not cracked since i welded it..

its not perfect looking but in perfect working order.

painted with vht 2000* black paint

 

I got a set of white 16" ASA wheels. They are 4 lug universal. Three tires are kumho Ecsta 711, 205/40 R16 and a Dunlop 205/40 R16. One tire needs to be replaced.
I also have a set of 18" wheels. The brand is unknown. They are 5 lug universal. The tires are Pirelli P Zero 215/45 ZR18. One tire needs to be replaced.
Pics upon request.
http://www.irnn.net/forum/inde...30155
Looking to get 325 obo for the 16" and 400 obo for the 18". Will also consider trades for other wheels and eg parts.
Also have a brand new b16a2 dizzy. Throw me offers.



Modified by sol_1 at 8:07 PM 5/30/2006

 

nayone selling s2000 items?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nuttybumpo &raquo;</TD></TR><TR><TD CLASS="quote">nayone selling s2000 items?</TD></TR></TABLE>
Get your baller *** outta the poor ppl's thread!
Chicago FS thread "Best known for reposting the same shitty items we've been trying to sell for the last 5 months"

 

luder94 is from chicago he has some dope *** s2000 parts

 

Anyone know any body shops that do decent work for cheap?

 

wtb the following:

-hasport mounts for a b-series motor in a eg hatch, the ones for the hydro tranny and not cable

-1/2 sized fluidyne radiator
-oem cf hood for eg hatch
-skunk2 valvetrain( Pro-Series retainers, springs, pro1 cams) and skunk2 IM and TB

pm me if you guys have anything, thanks!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 90LSpimpin &raquo;</TD></TR><TR><TD CLASS="quote">Chicago FS thread "Best known for reposting the same shitty items we've been trying to sell for the last 5 months" </TD></TR></TABLE>
lol... admiting the problem is the first step towards recovery

 

WTB: NEED EG/EK shell in good condition.

Check my sig for FS items

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nuttybumpo &raquo;</TD></TR><TR><TD CLASS="quote">luder94 is from chicago he has some dope *** s2000 parts</TD></TR></TABLE>

you don't see luder94 on here do you? lol.

 

88-91 civic/ crx parts
oem crossmember $20
88-89 crx tail lights (not good condition) all 3 pc $30
88-91 civic hb fenders RED MINT $60 pr
crx hatch with good glass BLUE $50
crx window elevator $30 pr
JDM SIR hood release $100
JDM crx back seat no seat belts or brackets $160
fake jdm back seat no seat belts or brackets $60
crx 4pt roll bar used kirk racing? comes with plates and bolts $250
civic 4pt race roll bar auto power NEW comes with everything $300
d series valve cover $5
crx/civic starter $10
ef clocks $5
ef power mirror switch $5
civic hb blk STD center tail light pc $5
ef full size raditior $45
civic si back seat top pcs (flip down) $30
civic dx back seat top pcs (flip down) $20
civic std back seat bottom pc $10
89 +oem LCA W/ new ES shock bushing $30 pr
88-91 civic 4 door power mirrors $25 pr
oem/jdm 88-89 civic wagon arm rest $90
momo steering wheel adaptor $35

94+integra
tan arm rest $30

92+ civic
oem clock $30
cx blue air bag driver side $30
dimmer/cruise/sunroof button $15
fog/defogger button $15

96+civic
passenger side mirror (non power) $25

other parts
wheel adaptor from 4x4.5 to 5x100 3inchs wide $50
14in panasports 4x4.5 missing one cap with tires $600
14in prime 5 star looking rims with shitty tires missing 2 caps $80
14in oem 91 prelude si rims with 3 bad tires and 1 good tire missing 2 caps $60
megan 4into1 stainless steel header NEW d-series $130







Modified by igotcrx at 5:54 AM 5/31/2006

 

My birthday is June 9th!!!! june rocks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thapimpfromchi &raquo;</TD></TR><TR><TD CLASS="quote">Anyone know any body shops that do decent work for cheap? </TD></TR></TABLE>

Body work and cheap should not go together.

I have 3 cars lined up, what do you need done ?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 90blackcrx &raquo;</TD></TR><TR><TD CLASS="quote">

Body work and cheap should not go together.

I have 3 cars lined up, what do you need done ? </TD></TR></TABLE>

let me rephrase that "reasonable body work"... better?

haha, my old man has an impala in the garage needs new quarters put on, but doesnt wanna spend too much. looking for ... cheap........ ... body work.. u know anyone?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thapimpfromchi &raquo;</TD></TR><TR><TD CLASS="quote">

let me rephrase that "reasonable body work"... better?

haha, my old man has an impala in the garage needs new quarters put on, but doesnt wanna spend too much. looking for ... cheap........ ... body work.. u know anyone?</TD></TR></TABLE>

Order the panels ( not much for that car ) and I will weld them on.