CRX B18c1
Thread Starter
Joined: May 2006
Posts: 1
Likes: 0
From: Bountiful, UT, USA
CRX B18c1
Right now im workin on puttin my b18c1 on my 88 CRX-SI.
and im goin OBD1 as well. I was just wondering what it would run on the quarter mile stock. Ive heard mid 13s but i dont know it'd be great to have it running 13s with the stock motor but, sounds too good. what do u guys think it would run?
and im goin OBD1 as well. I was just wondering what it would run on the quarter mile stock. Ive heard mid 13s but i dont know it'd be great to have it running 13s with the stock motor but, sounds too good. what do u guys think it would run?
Honda-Tech Member
Joined: Jul 2003
Posts: 9,638
Likes: 1
From: Near Charlotte
Re: CRX B18c1 (ismaelcrx)
Take it to the track and find out. There are about eleventy billion variables and unfortunately none of us of readers of the future so we can't really tell you.
Joined: Apr 2006
Posts: 85
Likes: 0
From: Anchorage, Alaska, USA
it's possible, I've seen it done a few times, I myself have ran 13.6-14.00 with a stock motor in a crx, the only thing done was an obd-0 into an obd-1 conversion and a chipped up p28 ecu running a skunk2 program.. I also ran slicks and open stock b16 headers.. but it also depends on how strong your motor is as well, some motors put down more horse than others even though they have the same build..
Honda-Tech Member
Joined: Jan 2004
Posts: 11,129
Likes: 36
From: GO AUTOWORKS DOT COM
Re: (FastReligion)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FastReligion »</TD></TR><TR><TD CLASS="quote">it's possible, I've seen it done a few times, I myself have ran 13.6-14.00 with a stock motor in a crx, the only thing done was an obd-0 into an obd-1 conversion and a chipped up p28 ecu running a skunk2 program.. I also ran slicks and open stock b16 headers.. but it also depends on how strong your motor is as well, some motors put down more horse than others even though they have the same build.. </TD></TR></TABLE>
{o,o}
|)__)
-"-"-
O RLY?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRX Toad »</TD></TR><TR><TD CLASS="quote">Take it to the track and find out. There are about eleventy billion variables and unfortunately none of us of readers of the future so we can't really tell you. </TD></TR></TABLE>
agreed
{o,o}
|)__)
-"-"-
O RLY?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRX Toad »</TD></TR><TR><TD CLASS="quote">Take it to the track and find out. There are about eleventy billion variables and unfortunately none of us of readers of the future so we can't really tell you. </TD></TR></TABLE>
agreed
Joined: Apr 2006
Posts: 85
Likes: 0
From: Anchorage, Alaska, USA
Re: (Autoworks)
^^^it's possible I wouldn't lie.. I've been in this racing scene since 98 just never joined honda tech until now.. and I've learned and seen quite a bit, not as much as some folks around here but enough to survive..
here's a link to my new setup, was going to sell or hoping to run 12's when it's all put together and it's a project that's put together from a short budget as well...
http://www.alaskamotorsports.c...28205
here's a link to my new setup, was going to sell or hoping to run 12's when it's all put together and it's a project that's put together from a short budget as well...
http://www.alaskamotorsports.c...28205
Thread
Thread Starter
Forum
Replies
Last Post
CRXRTYPE
Honda CRX / EF Civic (1988 - 1991)
8
May 21, 2004 08:02 PM
2quickcrx
Honda CRX / EF Civic (1988 - 1991)
28
Mar 12, 2004 07:56 AM
