Posting this up here figuring the road racing guys have the most use for them.

https://honda-tech.com/zerothread?id=1503747
















Modified by jbs at 7:03 PM 5/19/2006


Modified by jbs at 7:04 PM 5/19/2006

 

I'm interested if you make one for EK.

 

Sorry no, I only have molds for the EG. Its expesive to tool one for a new car and I don't have a market to invest for an EK.

 

very nice piece. A little out of my price range though.
Good work nonetheless..

 

Thanks for the props! In my defense of the price, Memoryfab & J's Racing are over $100 for each. Granted they are CF. . . . . Memoryfab's CF is $145 and Fiberglass is $135. J's racing CF is $160. Not to mention they only offer the right/passenger side, no one to my knowledge makes the left/driver side.
Lastly, the prices above are not shipped prices as well. Just wanted to put it out there for comparison.

 

Given that I just ripped off my old brake ducks hitting the guard rail at Daytona in turn 1, I'm going to be needing a set. FYI, very nice product

By the way, does it have a jdm stamped on it? if it does, then you could charge an extra hundred each ... sorry couldn't resist

 

Hi, where can I buy that splitter you are using?

 

nice idea but damn expensive...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kenji M &raquo;</TD></TR><TR><TD CLASS="quote">Hi, where can I buy that splitter you are using?</TD></TR></TABLE>

You mean the lip? Bought it long time ago from FiberImage. It's the spoon replica.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civexspeedy &raquo;</TD></TR><TR><TD CLASS="quote"> nice idea but damn expensive...</TD></TR></TABLE>

Thanks! It's less than half the price of other competitors. . . . . . just my .02.

 

definelty a nice job, and I would have grabbed a set if they were cheaper. (theres a reason I/we don;t have the ones twice the price either, most of these guys have race cars, they will not hesitate to simply put a hole saw through their bumper for brake ducts and save the 135) I will probably just pick up some replica fogs for like 80 bucks to fill the holes the previous owner cut out for pep boys fogs, but if these were cheaper, I'd set up a duct for track.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eyal 951 &raquo;</TD></TR><TR><TD CLASS="quote">definelty a nice job, and I would have grabbed a set if they were cheaper. (theres a reason I/we don;t have the ones twice the price either, most of these guys have race cars, they will not hesitate to simply put a hole saw through their bumper for brake ducts and save the 135) I will probably just pick up some replica fogs for like 80 bucks to fill the holes the previous owner cut out for pep boys fogs, but if these were cheaper, I'd set up a duct for track. </TD></TR></TABLE>

Point well taken. . . . . .

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jbs &raquo;</TD></TR><TR><TD CLASS="quote">Point well taken. . . . . . </TD></TR></TABLE>
You definetly did a good job, and at some point its obviously not worth making for the return. Have you tried selling these on ebay and such, I bet you can move em there for a while and make some extra money.

 

I'd like a set. How do I order?

 

I just got mine.

These ducts are really nice. I'll post some pics up later.

 

JB:
If you want to create an Install document for your parts, you can help me install mine and we can take photos and document the process. You can also do a how-to write up here, to show the usefulness. Let me know!

 

hey not too shabby for Street stuff that works for OEM bumpers. I'd rock it if I was driving an EG on the street and tracking them now and again.

 

nice looking parts

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueTeg &raquo;</TD></TR><TR><TD CLASS="quote">I'd like a set. How do I order?</TD></TR></TABLE>

I take Paypal. PM me for details.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IGGY &raquo;</TD></TR><TR><TD CLASS="quote">I just got mine.

These ducts are really nice. I'll post some pics up later.</TD></TR></TABLE>

I like hearing from happy/contented buyers. Please post pics.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DavidR &raquo;</TD></TR><TR><TD CLASS="quote">JB:
If you want to create an Install document for your parts, you can help me install mine and we can take photos and document the process. You can also do a how-to write up here, to show the usefulness. Let me know! </TD></TR></TABLE>

Definitely a good idea. I'll give you a call.