i heard h22's own b18c's all day.... are h22's really faster than b18c's i did my research and i found that h22's have more HP and more TQ... soo am i right?

 

I would like to know what the answer to that is too. I would think that a b18c would be the better one.

 

anyone know for sure??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ekVtecPower &raquo;</TD></TR><TR><TD CLASS="quote">anyone know for sure??</TD></TR></TABLE>

IBTF/IBTL

Are you serious, there has to be a thread a day about this. It really comes down to personal preference, but as far as which is faster...thats the H, no doubt.
I just don't like H motors because they weigh 100lbs more than b series, and more work is involved in the swap.
I'm going K, which also has more work than an H, but i believe it's worth it. IMO, i just don't like the H motor. Don't know why, but i'd take a c5 over a H22, maybe because the c5 holds its value better...

 

This question has entirely too many variables to be answered like that. It will come down to personal preference.

In my preference though, I would prefer the B anything because after doing only one H swap, I would prefer to never work on another one again.

 

whoever said h22 weighs 100lbs more than b series is a liar and a scum

 

Then there is that too, although I don't think I would go as far as to call them scum lol.

I believe it was posted here a while ago and it's actually less than 65 lbs.

 

h&gt;b anyday.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecspeed1320 &raquo;</TD></TR><TR><TD CLASS="quote">h&gt;b anyday.</TD></TR></TABLE> word!!!!!!!!!!! bout time the H-Series finally getting some rep... love mine

 

If the motors were completly stock and in identical chassis. i would think the car with the 2.2L would win.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecspeed1320 &raquo;</TD></TR><TR><TD CLASS="quote">h&gt;b anyday.</TD></TR></TABLE>

For the most part, yes. There are some downsides to the H though.

 

H&gt;B
No replacement for displacement especailly when the H head flows 305 with just a valve job.

Try getting that out of a B

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skunked &raquo;</TD></TR><TR><TD CLASS="quote">H&gt;B
No replacement for displacement especailly when the H head flows 305 with just a valve job.

Try getting that out of a B </TD></TR></TABLE>
^^GDMF WORD!!!

 

The h22 motor pulls hard than any B-motor . The torque is one that really makes the difference.

 

Torque FTW.I will never go back to a Bseries again.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H23aEG &raquo;</TD></TR><TR><TD CLASS="quote">Torque FTW.I will never go back to a Bseries again.</TD></TR></TABLE>
^^ my sentiments exactly... they only hate be because they do not know

 

Same here love my h

 

Love my H22 bro had a B18c1 and I stomp on him all day. I can love that all day long lol

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Phat8186 &raquo;</TD></TR><TR><TD CLASS="quote">Love my H22 bro had a B18c1 and I stomp on him all day. I can love that all day long lol</TD></TR></TABLE>
^^ more posts like this always welcome (and those regarding K-Series hating)

 

Whats wrong with K?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H23aEG &raquo;</TD></TR><TR><TD CLASS="quote">Whats wrong with K?</TD></TR></TABLE>
^^ awww man why you going to get me started on that topic

 

Lets beat this dead horse some more, too many factors but you know deep inside the H is #1, expletive all you haters!!

 

Hey i love my H.But if i had the money i would totally go with the K

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H23aEG &raquo;</TD></TR><TR><TD CLASS="quote">Hey i love my H.But if i had the money i would totally go with the K</TD></TR></TABLE>
^^ then you are seriously misinformed my friend... put the money in the H

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thahuhstunna &raquo;</TD></TR><TR><TD CLASS="quote">
^^ then you are seriously misinformed my friend... put the money in the H</TD></TR></TABLE>

How can you favor an outdated platform?
***shakes head....***