Turbo EP3
Thread Starter
Joined: Dec 2003
Posts: 104
Likes: 0
From: Millbury, MA., USA
Turbo EP3
I don't normally post in this forum but I thought this EP3 was apporpriate enough to fit in well here 
Recently at ****'s Autospec we finished up our new project and were pretty surprized. Some of the East coast guy's might remember this car from the Hot Import Nights show in Boston but we will be bringing it to the track this weekend with any luck that the weather will be nice.
Anyway, it's a completely stock K20a3 engine, a custom built Peak Boost turbo setup, and tuning done with K-pro.
Beautiful work done by Ken at Peakboost
At 10psi. the car was tuned out to 342whp and 264tq. stock! I feel pretty confident the car could handle 400whp safely. Hopefully that will be next
Recently at ****'s Autospec we finished up our new project and were pretty surprized. Some of the East coast guy's might remember this car from the Hot Import Nights show in Boston but we will be bringing it to the track this weekend with any luck that the weather will be nice. Anyway, it's a completely stock K20a3 engine, a custom built Peak Boost turbo setup, and tuning done with K-pro.
Beautiful work done by Ken at Peakboost
At 10psi. the car was tuned out to 342whp and 264tq. stock! I feel pretty confident the car could handle 400whp safely. Hopefully that will be next
Thread Starter
Joined: Dec 2003
Posts: 104
Likes: 0
From: Millbury, MA., USA
Re: (Andrey)
Our base run on the stock a3 before the turbo setup was 146ish (if I can remember right). Thats almost 200hp gained I know it's capable of more with a little more modification and tuning.
I know it's capable of more with a little more modification and tuning.
Trending Topics
Thread Starter
Joined: Dec 2003
Posts: 104
Likes: 0
From: Millbury, MA., USA
Re: Turbo EP3 (EP3tune2RULE)
Well, it's not a setup you can buy on the market, it was custom built specifically for THIS car. The only one out there. So, any pricing info would have to be brought up with Ken at Peakboost since he does the work.
Honda-Tech Member
Joined: Feb 2006
Posts: 772
Likes: 0
From: soooooCA
Re: Turbo EP3 (Dat1BVtecN)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dat1BVtecN »</TD></TR><TR><TD CLASS="quote">fucin hot, nice turbo manifold </TD></TR></TABLE>
video!....please
</TD></TR></TABLE>video!....please
Thread Starter
Joined: Dec 2003
Posts: 104
Likes: 0
From: Millbury, MA., USA
Re: Turbo EP3 (Kenpo)
Yup, Peakboost posted up some pictures of the job while they were fabricating The only video we have at the moment of is this short clip of a rip through the Boston tunnel. I'm sure there will be more to come along with some track times shortly.
http://www.turbooptions.com/video/kcivic.WMV
The only video we have at the moment of is this short clip of a rip through the Boston tunnel. I'm sure there will be more to come along with some track times shortly. http://www.turbooptions.com/video/kcivic.WMV
Honda-Tech Member
Joined: Mar 2004
Posts: 1,681
Likes: 0
From: CASH RULES SOCAL DAILY
Re: Turbo EP3 (kikiboi)
OIMMMMMGGGGF*************************n G*******************D
OIMMMMMGGGGF*************************n G*******************D
OIMMMMMGGGGF*************************n G*******************D
OIMMMMMGGGGF*************************n G*******************D
props
OIMMMMMGGGGF*************************n G*******************D
OIMMMMMGGGGF*************************n G*******************D
OIMMMMMGGGGF*************************n G*******************D
props
Thread
Thread Starter
Forum
Replies
Last Post
redzcstandardhatch
Forced Induction
53
May 12, 2006 04:18 PM