This car was handled to me when my brother tried to get a complete setup from NRG in Tallahassee. If anybody lives in the northwest area of Florida, NRG Performance was notorious for messing up ppl orders and soon he left Florida because he knew what he was getting into. Anyways, this was one of the "show" cars from the shop. After a engine blowup (spun rod), I decided to take over and fix all the problems it needed. Parts thats waiting for to be installed:

Motor:
GSR head
DRAG III turbo kit w/ intercooler
Tial 35M Wastegate
GSR block bored and honed 81.5MM
Wiesco low comp pistons
Eagle H-beam rods
Golden Eagle blockguard
New OEM oil pump
All Brand new seals
AEM polished fuel rail w/ regulator
RC 550cc injetors
ACL bearings
ARP Headstuds

Interior:
MOMO Champion steering wheel
VAFC vtec controller
WTB: Type R Seats (or Recaro's)

Exterior:
OEM JDM Metal Front End w/ molded lip
Molded Side Skirts
17x7 generic 5 star (bronze)

On to the pictures:





Taking off the molded 3 piece mid wing. I did not like the wing. Preferred the Type R instead. No wing looks better, dont you think?!












Modified by hbkxtbone at 6:02 PM 5/13/2006

 

u need to fix the pics, but good luck

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by juan671_M2S &raquo;</TD></TR><TR><TD CLASS="quote">u need to fix the pics, but good luck</TD></TR></TABLE>

 

?

 

holy **** good luck.

 

hope the de ricing works out for ya.. good luck

 

sick, you got this for free?!

 

Those don't look like generic 5 stars, they look like 5 Zigen Fno1R-C wheels, a very good wheel. I would have done away with the molded wing, side skirts and front lip, also

 

yup, looks like 5zigen FN01RCs to me

 

seen worse

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FutureITR &raquo;</TD></TR><TR><TD CLASS="quote">holy **** good luck. </TD></TR></TABLE>

 

well, my brother did have a sick CRX all-motor setup but never came through so we had to "bully" the owner to give something in return so we got this car. It's been siting under a car cover for about two years now. It's gonna take a couple of months to figure it all out..you guys are right they 5 zigen ....



updates will come soon..

 

good luck

and wingless FTW

 

i member the hrs n hrs me n dj spent on dat car u need to hurry n put the motor back in it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by C Neighoff &raquo;</TD></TR><TR><TD CLASS="quote">good luck

and wingless FTW </TD></TR></TABLE>

 

damn....good luck on the build

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by C Neighoff &raquo;</TD></TR><TR><TD CLASS="quote">good luck

and wingless FTW </TD></TR></TABLE>

true that

 

up for de-ricing.

 

well at least you have the front end

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMDC4.. &raquo;</TD></TR><TR><TD CLASS="quote">well at least you have the front end </TD></TR></TABLE>

put this car as close to JDM stock looking as possible

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by k_motor &raquo;</TD></TR><TR><TD CLASS="quote">damn....good luck on the build</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FutureITR &raquo;</TD></TR><TR><TD CLASS="quote">holy **** good luck. </TD></TR></TABLE>

ditto

 

(b16ek)

The original motor spun a rod. I swear they didnt know how to do anything there. They shut down I believe and he ran up north to New York I think.

 

good luck dude

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.Wrench &raquo;</TD></TR><TR><TD CLASS="quote"> good luck dude</TD></TR></TABLE>YEAH