FS or FT: B18C5 Longblock & Comptech Headers
Thread Starter
Honda-Tech Member
Joined: Oct 2003
Posts: 2,438
Likes: 0
From: Chicago, IL, USA
FS or FT: B18C5 Longblock & Comptech Headers
FS: Comptech headers for B-Series $350
FS: B18C5 Complete longblock $3,400 obo
Spoon Throttle Body
OEM Type R Cams
Crower Springs
Crower Retainers
Crower Valves
Toda Cam Gears
Toda Timing Belt
JDM ITR Pistons 11.1
OEM Type R Rods
OEM Crank balanced and knife edged
Head was Port and Polish Stage 2
Intake Manifold was port matched
This was a fresh new block bought straight from the dealer not a rebuilt block with high mileage. I've decided to just resleeve my stock motor now and fully build it up for turbo instead. This motor can easily handle 9K RPM daily. I have listed all the mods on this motor below. I do not have the original receipt for this block since I bought this used. I can gaurantee this motor is legit and against Dead on Arrival.
All blocks purchased legally from a Acura Dealer should have the following 3 marks?
All Acura sold blocks should have the following marks as I know on top of my head.
Engine Block Code starts with 083xxxx while blocks installed onto a car starts with either 1xxxxxx or 5xxxxxx.
Red painted bolt on the right side of Engine Block Code.
The word DOT stamped vertically directly under the Engine Block Code.
Modified by AlienKrOZ at 6:04 PM 5/10/2006
Modified by AlienKrOZ at 9:43 PM 5/17/2006
FS: B18C5 Complete longblock $3,400 obo
Spoon Throttle Body
OEM Type R Cams
Crower Springs
Crower Retainers
Crower Valves
Toda Cam Gears
Toda Timing Belt
JDM ITR Pistons 11.1
OEM Type R Rods
OEM Crank balanced and knife edged
Head was Port and Polish Stage 2
Intake Manifold was port matched
This was a fresh new block bought straight from the dealer not a rebuilt block with high mileage. I've decided to just resleeve my stock motor now and fully build it up for turbo instead. This motor can easily handle 9K RPM daily. I have listed all the mods on this motor below. I do not have the original receipt for this block since I bought this used. I can gaurantee this motor is legit and against Dead on Arrival.
All blocks purchased legally from a Acura Dealer should have the following 3 marks?
All Acura sold blocks should have the following marks as I know on top of my head.
Engine Block Code starts with 083xxxx while blocks installed onto a car starts with either 1xxxxxx or 5xxxxxx.
Red painted bolt on the right side of Engine Block Code.
The word DOT stamped vertically directly under the Engine Block Code.
Modified by AlienKrOZ at 6:04 PM 5/10/2006
Modified by AlienKrOZ at 9:43 PM 5/17/2006
Thread Starter
Honda-Tech Member
Joined: Oct 2003
Posts: 2,438
Likes: 0
From: Chicago, IL, USA
Re: FS or FT: B18C5 Longblock & Comptech Headers (AlienKrOZ)
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Stationwagon
Southern California (Sales)
4
Jun 7, 2013 02:25 PM
AlienKrOZ
Mid-West (Sales)
16
May 8, 2008 08:11 AM
